Oil/water alarm unit ÖWWG 3 with burner connection kit

Afriso Oil/water alarm unit ÖWWG 3 with burner connection kit
Afriso Oil/water alarm unit ÖWWG 3 with burner connection kit
Afriso Oil/water alarm unit ÖWWG 3 with burner connection kit
Data sheet Oil/water alarm unit ÖWWG 3 with burner connection kit
Afriso Data sheet Oil/water alarm unit ÖWWG 3 with burner connection kit

Versions

Part no. Remember
Oil/water alarm unit ÖWWG 3 with burner connection kit 44490
EnOcean® wireless module TCM 320 78082

Blue part no. = in-stock items

Description Format Language Download / Link
Data sheet Oil/water alarm unit ÖWWG 3 with burner connection kit Catalog page PDF
Afriso Data sheet Oil/water alarm unit ÖWWG 3 with burner connection kit
WATCHDOG-LINE alarm units Alarm units PDF
Afriso WATCHDOG-LINE alarm units
The ÖWWG 3 oil/water alarm unit consists of a control unit with visual/audible alarm, Test and Acknowledge buttons as well as a flexible PTC thermistor probe. Cable and connector for connection of burner and boiler are fully wired and ready to be connected. In the event of an alarm, the unit triggers visual and audible alarms and switches off the burner. The audible alarm can be muted with the Acknowledge button. The visual alarm remains active until the leak has been removed. The burner then resumes operation. The Test button allows you to simulate an alarm condition in order to perform a function test. Alarm units with the EnOcean-ready label can be integrated into your existing building automation systems, for example, AFRISO smart home, at a later point in time. To do so, plug the EnOcean® wireless module into the EnOcean® interface (PCB of the device). The AFRISOhome gateway in conjunction with additional AFRISO smart home products with EnOcean® wireless technology allow you to configure a whole range of fully customisable, extensible features for the protection of plants and buildings.
Operating temperature range
Ambient:
-5/+40 °C
Storage:
-10/+60 °C
Probe
57 x 14 mm
Connector
Burner:
7-pin, female with 3 m cable
Boiler:
7-pin, male, with 3 m cable
Supply voltage
AC 100 – 240 V
Nominal power
10 VA
Switching output
Relay contact:
1 x voltage-free changeover contact
Contact rating:
Max. AC 250 V, 2 A
Alarm sound
Min. 70 dB(A)
Housing
Wall mounting housing made of impact-resistant plastic (ABS)
W x H x D:
100 x 188 x 65 mm
Weight:
600 g
Degree of protection:
IP40 (EN 60529)
Approval for construction products
DIBt: Z-65.40-339
Scope of delivery
  • Control unit
  • 1 connected PTC thermistor probe
  • One connected plug each for burner and boiler connection
Option
  • EnOcean<sup>®</sup> wireless module (can be retrofitted)