Patented, low-noise thermostat valve body with fixed, calibrated orifice plate for measuring and adjusting the volume flow directly at the valve. Mounting cap with valve shut-off function. Threaded connection M30 x 1.5 mm for thermostat control heads and actuators. Fully adjustable with ES-SV adjustment key. Valve spindle with double O ring seal. The valve insert can be replaced with the MGV mounting unit at operating pressure without the system having to be drained.
VarioQ is a triple-stage hydraulic balancing system which allows for optimisation of the heating pipe system by means of calculation, measurement and adjustment. With the app AFRISO TOOLBOX (module hydraulic balancing), the optimum water volume is determined automatically and the required VarioQ valves are recommended and can be printed as a bill of materials. The CAPBs® set valve balancing (measuring instrument) measures the flow rate in litres per hour and the water volume can be easily set at the valve without conversion. Even minimum flow rates can be set with this system.
<div class="gallery-information">
<b>Legende:</b>
<ol>
<li>Marking</li>
<li>Counter-mark</li>
<li>Mark</li>
<li>Valve insert</li>
<li>Indication DN</li>
<li>Mounting cap</li>
</ol>
</div>
<div class="gallery-information">
<b>Legende:</b>
<ol>
<li>Measuring point P2 downstream of measuring unit</li>
<li>Fixed, calibrated measuring unit</li>
<li>Measuring point P1 upstream of measuring unit</li>
</ol>
</div>
