Oil/water alarm unit ÖWWG 3

Afriso Oil/water alarm unit ÖWWG 3
Afriso Oil/water alarm unit ÖWWG 3
Afriso Oil/water alarm unit ÖWWG 3
Data sheet Oil/water alarm unit ÖWWG 3
Afriso Data sheet Oil/water alarm unit ÖWWG 3

Versions

Part no. Remember
Oil/water alarm unit ÖWWG 3 AC 100-240 V, Kabellänge 3,2 m 44510
Oil/water alarm unit ÖWWG 3 AC 100-240 V, Kabellänge 10 m 44494
Oil/water alarm unit ÖWWG 3 AC/DC 15–40 V, Kabellänge 3,2 m 44488

Blue part no. = in-stock items

Description Format Language Download / Link
Data sheet Oil/water alarm unit ÖWWG 3 Data sheet PDF
Afriso Data sheet Oil/water alarm unit ÖWWG 3
Operating instructions Operating instructions PDF
Afriso Operating instructions
Oil/water alarm unit ÖWWG 3 Operating instructions PDF
Afriso Oil/water alarm unit ÖWWG 3
WATCHDOG-LINE alarm units Alarm units PDF
Afriso WATCHDOG-LINE alarm units
The oil/water alarm unit in a wall mounting housing triggers visual and audible alarms in the event of accumulations of liquids which can be caused by tank leaks, backflow, flooding, etc. ÖWWG 3 consists of a control unit with visual/audible alarm, Test and Acknowledge buttons as well as a flexible PTC thermistor probe. The probe is mounted at the lowest point of the area to be monitored. Alarm is triggered when there is contact with escaped liquid. The audible alarm can be muted with the Acknowledge button. The visual alarm remains active until the leak has been removed. The test button allows you to simulate an alarm condition in order to perform a function check. The self-monitoring probe triggers an alarm if it is damaged. The voltage-free relay contact is provided for connection of additional alarm equipment (such as additional alarm unit ZAG 01). ÖWWG 3 is suitable for panel mounting with a mounting frame. A sealing kit (IP 54) is available for rough application conditions. Alarm units with the EnOcean-ready label can be integrated into your existing building automation systems at a later point in time. To do so, plug the EnOcean® wireless module into the EnOcean® interface (PCB of the device). The AFRISO gateway in conjunction with additional AFRISO products with EnOcean® wireless technology allow you to configure a whole range of fully customisable, extensible features for the protection of buildings.
Operating temperature range
Ambient:
-5/+40 °C
Storage:
-10/+60 °C
Probe
57 x 14 mm
Cable length:
3.2 m or 10 m
Supply voltage
AC 100 – 240 V
AC/DC 15 – 40 V
Nominal power
10 VA
Switching output
Relay contact:
1 x voltage-free changeover contact
Contact rating:
Max. AC 250 V, 2 A
Alarm sound
Min. 70 dB(A)
Housing
Wall mounting housing made of impact-resistant plastic (ABS)
W x H x D:
100 x 188 x 65 mm
Weight:
600 g
Degree of protection:
IP40 (EN 60529)
Approval for construction products
DIBt: Z-65.40-339
Scope of delivery
  • Control unit
  • PTC thermistor probe
Option
  • EnOcean<sup>®</sup> wireless module (can be retrofitted)