Data logger with display DL 10

Afriso Data logger with display DL 10
Afriso Data logger with display DL 10
Afriso Data logger with display DL 10
Afriso Data logger with display DL 10
Data sheet Data logger with display DL 10
Afriso Data sheet Data logger with display DL 10

Versions

Part no. Remember
Data logger with display DL 10-4 SV 4 channels 31256

Blue part no. = in-stock items

Description Format Language Download / Link
Data sheet Data logger with display DL 10 Data sheet PDF
Afriso Data sheet Data logger with display DL 10
Digital display unit with integrated data logger in plastic housing for control panel mounting. DL 10 is used for visualising four independently parameterisable analogue signals; it features a data logger function for all channels and provides an integrated supply for 2-wire and 3-wire transmitters. Each channel has a current/voltage input and can be scaled as required. There are several types of indication. For example, the measured value can be displayed as a quasi-analogue bar. The measured values can be acquired per channel in adjustable storing cycles and saved to an SD memory card. In addition, it is possible to adjust trigger thresholds to start the storing function (one channel can also trigger another channel). An integrated, electronic wide range power supply unit allows for operation in a supply range from DC 20–253 V or AC 50–253 V.
Display
5-digit graphical LC display,
With backlight,
Text-based user interface,
Selectable user interface language German/English/French,
Freely selectable units from list,
Custom display units can be defined
Measuring range
± 99,999 Digits
Start and end values scalable as required
Linearity
± 0.2 % v. Mw.
Resolution
10 Bit
Response time
< 0.2 s, additional damping can be activated
Operating temperature range
Ambient:
0/50 °C
Supply voltage
AC 50 – 253 V, 7 VA
DC 20 – 253 V, 5 W
Input resistance
Current:
Approx. 120 Ohm
Voltage:
Approx. 100 kOhm
Sensor supply
DC 20 V open circuit voltage
DC 17 V at 20 mA
Limited to 25 mA/channel
Sensor input
Analogue:
0–20 mA, 4–20 mA, 0–10 V
Digital counter:
Max. 30 V, max. 2 Hz
Housing
Standard rack mounting housing
W x H x D:
96 x 48 x 135 mm
Panel cut out
W x H:
92 x 45 mm
Degree of protection
Front:
IP20 (EN 60529)
Terminals:
IP20 (EN 60529)
Linearisation
Customer-specific linearisation with a max. of 24 points for the indication of volume (e.g. litres) in non-linear tanks for each channel. Bearing charts for cylindrical horizontal tanks and spherical tanks are pre-programmed.
Interfaces
AD-UART
Data memory
SD-/MM card (max. 2 GB), formatting: FAT, FAT 16 fastest saving cycle 1 second.
Panel cut out
Panel cut out
Afriso