Images 5
Back
Flue gas analyser BLUELYZER ST set Pro | P00131
Complete package flue gas analysis BLUELYZER ST set Pro
in-stock items
- CO high device for measurements at all heat generators up to 20,000 ppm, including pellets boilers
- comprehensive all-rounder set with IR printer
- Combustion air probe for measurements at room air-independent systems
- robust hard top case
- the world's smallest, fully-featured HVAC all-rounder with TFT colour display
- Flue gas analysis, pressure measurement (draft) and (differential) temperature measurement with a single instrument
- CO ambient measurement with two freely adjustable alarm thresholds
- fully-fledged temperature measurement program, differential temperatures (e.g. flow/return) can also be determined
- Hold function: Display shows the measured value for a given period of time while the measurement keeps running in the background
- Measurement programs and measured values can be freely edited
- display reverse function: TFT display can be rotated by 180° for easy reading and excellent working conditions at the point of measurement
- zoom mode for entire display, "Single-value display"
- Memory function with up to 100 measurement logs
- CAPBs®-enabled
Ideal for HVAC professionals for accurate adjustments or inspections, on par with official flue gas analysers. BLUELYZER ST is suitable for flue gas analysis, pressure measurement and (differential) temperature measurement. The HVAC all-rounder also provides exact calculation of the Eta value for all condensing heating systems with fuel-specific dew point calculation.
Einsatzmedien
Produkteigenschaften
Schnittstellen
Zulassungen
measuring ranges (measured values)
- Flue gas temperature/differential temperature
- 0/1 150 °C
- Air temperature/combustion air temperature
- -20/+200 °C
- Draft
- -70/+70 hPa
- O2 measurement
- 0/21 Vol.-%
- CO measurement
- nominal:
- 0/20 000 ppm
additional technical specifications
- Indication (calculated values)
- CO2, COunverdünnt, Lambda, Taupunkt, Eta efficiency, Abgasverluste qA, CO mg/m3 (natural gas), CO mg/kWh (Heizöl)
- Operating temperature range
- Ambient:
- 0/40 °C
- Storage:
- -20/+50 °C
- Dimensions
- W x H x D:
- 66 x 143 x 37 mm
- Degree of protection
- IP 42 (EN 60529)
- Display
- TFT colour display 2.8 "
- W x H:
- 45 x 60 mm
- 240 x 320 pixels
- Connections
- Draft/pressure:
- ∅ 7 mm
- Gas:
- ∅ 8 mm
- temperature:
- socket type K
- Supply voltage
- lithium-ion battery (3.6 V/1800 mAh)
- power supply unit (mini USB)
- Battery or mains
- Hours of operation (eco mode)
- 12 Stunden
- Data memory
- microSD card, max. 16 GB
- Interfaces
- Infrared,
Bluetooth®,
QR code generator,
MicroSD-Kartenslot
- Approvals
- VDI 4206 (Blatt 1),
DIN EN 50379-2 für O2/CO2, TA, TG, Druck,
DIN EN 50379-3 for CO
- Scope of delivery
- Flue gas analyser BLUELYZER ST
- Kalibrierprotokoll
- protective sleeve for device with magnets
- Netzteil NTE 5 USB-A
- Charging cable USB-A - mini USB
- MicroSD-Karte
- Condensate filter cartridge KFP 2P
- 5 x Partikelfilter
- 5 x Teflon membrane
- Abgaskombisonde kompakt AKS-K 170 mm
- Thermal printer EUROprinter II
- Verbrennungsluftfühler TFB-VL 100 M mit Magnethalter
- Hard top case Pro blue
Flue gas probe plug-in units
Abb.
Bezeichnung
Thermal printer EUROprinter
Abb.
Bezeichnung
Soot pumps RSP
Interfaces
Abb.
Bezeichnung
Temperature probes
Abb.
Bezeichnung
Power supply units and charging cables
Memory
Abb.
Bezeichnung
Flue gas probes
Abb.
Bezeichnung
Condensate filter cartridges KFP
Abb.
Bezeichnung
