Images 4
Back
Pressure transducers DMU 21 D | 33410101150011
Pressure transducers DeltaFox DMU 21 D Version for differential pressure measurement
manufactured goods
| Measuring range | 0/2 bar |
|---|---|
| Connection | G½B |
| Connection | DIN 3852 |
| Electrical connection | Connector M12 x 1, 5-pin |
| Part no. | 33410101150011 |
- LED display and open collector switching output
- turn down up to a maximum of 1:10 through customer
- Min./Max. value storage
- housing can be rotated by 330° and pressure connections by 300°
For electronic differential pressure measurement which requires a local display in addition to the analogue output, for example for monitoring filters and fans. The differential pressure transducer can be used with all liquid and gaseous, corrosive media which a not highly viscous and which do not crystallize.
The DeltaFox® DMU 21 D pressure transducers feature two oil-immersed piezo-resistive stainless steel measuring cells and a 4-digit, red LED display. When pressure is applied, the pressure difference between the positive pressure side and the negative pressure side is converted into a current signal which is proportional to the differential pressure. A menu and two keys allow for displaying the measured values and for configuring the individual parameters.
- Measuring accuracy
- Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
- ≤ ± 1 % FSO (BFSL)
- Display
- 4-digit, red 7-segment, LED display,
Ziffernhöhe 7 mm,
range -1,999/+9,999,
Genauigkeit 0,1 % ± 1 Digit,
digital damping 0.3/30 s (programmable),
Anzeigegehäuse um 330° drehbar
- adjustment possibilities
- Turn down 1:10
Bezugspunkt für Schalt- und Analogausgang wählbar auf + Anschluss, - Anschluss oder Differenzdruck
- Measuring range
- 0/2 bar
- application area
- The maximum pressure in the system (maximum static pressure, one end) must not exceed the full scale value (FS).
- Operating temperature range
- Medium:
- -40/+125 °C
- Ambient:
- -25/+85 °C
- Storage:
- -40/+85 °C
- Process connection
- G½B (DIN 3852, both pressure connections rotatable by 300°)
- material
- Housing:
- plastic (PA 6.6, polycarbonate)
- diaphragm:
- Stainless steel 316 L
- pressure connection:
- Stainless steel 316 L
- Seal:
- FKM
- wetted parts
- diaphragm, Druckanschluss, Seal
- Supply voltage
- DC 24 V ± 10 %
- Output signal
- 3-wire, 4–20 mA
- Switching output
- 1 open collector (PNP), max. 125 mA
- Status indication via LED
Ein- und Ausschaltverzögerung 0 bis 100 s
repeatability: ≤ ± 0.5% FSO
- Load
- 500 Ω
- electrical protection
- short circuit proof and protected against reverse polarity
- Electrical connection
- Connector M12 x 1, 5-pin
- Degree of protection
- IP 65 (EN 60529)
- CE conformity
- EMC Directive 2014/30/EU
RoHS-Richtlinie 2011/65/EU
Pressure Equipment Directive 2014/68/EU
- Scope of delivery
- Pressure transducer DMU 21 D
- Montagewinkel
- 2 screws