This product is not available in your country
Images 2
Back
Flue gas analyser EUROLYZER® S1 1./44. BImSchV set O2, CO/H2+, NO, draft | P00144
Flue gas analyser EUROLYZER® S1 1./44. BImSchV set
manufactured goods
- TÜV-tested measurement as per 1st and 44th BlmSchV (German Federal Immission Act)
- automatische Dichtheitsprüfung von Messgerät und Sonde nach VDI 4207 Blatt 1
- H2-compensated robust CO sensor (measuring range up to 10,000 ppm)
- Data transmission via Bluetooth® or QR code to the AFRISO app EuroSoft® connect for on-site documentation
- large high-resolution display for optimum readability and and intuitive menu navigation, protected by scratch-resistant glass
- Pioneering "dual-mode concept": Intuitive one-hand operation via scroll wheel or touch display – sensitive even with work gloves
- Ready for all typical HVAC measuring tasks thanks to Bluetooth® connection to more than 35 sensor modules and sets of the CAPBs® system
- configurable macros for repetitive tasks
- Multi-memory: Combine up to six different measurements into a single measurement report (for example, full load measurement/partial load measurement or flue gas measurement and flow pressure measurement)
- 5 years warranty on O2 sensor
- 7 years full warranty in connection with a service contract
Designed for flue gas measurements at oil, gas and pellets fired systems as well as for tightness tests at gas lines, for checking the connection pressure/flow pressure and the pressure loss. TÜV-tested measurements as per 1st and 44th BlmSchV (German Federal Immission Act) can be performed reliably and intuitively. Fast and easy Bluetooth® connection to more than 35 sensor modules and sets of the AFRISO CAPBs® make EUROLYZER® S1 the central controller for all HVAC tasks.
Zielgruppe
Einsatzmedien
Produkteigenschaften
Schnittstellen
Zulassungen
measuring ranges (measured values)
- Flue gas temperature/differential temperature
- 0/1 150 °C
- Air temperature/combustion air temperature
- -20/+200 °C
- Draft
- -70/+70 hPa
- O2 measurement
- 0/21 Vol.-%
- COH2 measurement
- nominal:
- 0/4 000 ppm
- maximum:
- 0/10 000 ppm
- NO measurement
- 0/5 000 ppm
additional technical specifications
- Indication (calculated values)
- CO2, COunverdünnt, Lambda, Taupunkt, Eta efficiency, Abgasverluste qA, CO mg/m3 (natural gas), CO mg/kWh (Heizöl)
- Operating temperature range
- Ambient:
- 0/40 °C
- Storage:
- -20/+50 °C
- weight (measuring instrument)
- 540 g
- Dimensions
- W x H x D:
- 80 x 218 x 44 mm
- Degree of protection
- IP 40 (EN 60529)
- Display
- high-resolution touch display 4.3 "
- Connections
- Draft:
- ∅ 7 mm
- Gas:
- ∅ 8 mm
- temperature:
- 2 x socket type K
- Supply voltage
- lithium-ion battery x (3.6 V/5000 mAh)
- Power supply unit (USB-C)
- Battery or mains
- Hours of operation (eco mode)
- 12 Stunden
- Data memory
- internal memory, 10000 Messungen
- Interfaces
- Infrared,
Bluetooth®,
QR code generator,
USB-C
- Approvals
- TÜV-tested as per 1st and 44th BImSchV,
DIN EN 50379-1/2
- Scope of delivery
- Flue gas analyser EUROLYZER® S1 (O2, CO/H2+, NOx, draft, pressure)
- mit integrierten Haftmagneten im Gehäuse
- Calibration report
- Schnelllade-Netzteil NTE 5 SF
- charging cable USB-A to USB-C (1 m)
- 5 x Infiltec-Feinfilter
- 5 x Teflon membrane
- Kondensatfilterpatrone KFP
- Base handle AWS-B for interchangeable probes
- Wechselsonde AWS-S 300 mm
- Interchangeable probe AWS-S 750 mm
- Verbrennungsluftfühler TFB-VL 600-1
Optional auf Anfrage
- CO-Spülpumpe
- automatische Dichtheitsprüfung von Messgerät und Sonde nach VDI 4207 Blatt 1
- Messzellen: COhigh, NO2, SO2
