rental contract handheld measuring instruments EUROLYZER, MULTILYZER, STM 225, DPK 60-7 as well as EUROprinter
PDF
This product is not available in your country
Images 4
MULTILYZER STx - Set
Flue gas analyser
- All-in-one: Flue gas analysis, (differential) pressure measurement, (differential) temperature measurement, dust measurement, Pitot measurement (in conjunction with STM 225)
- ECO sensor: Lead-free O2 sensor with long service life and optimised calibration phase, short response time, resistant to biogenous fuels
- Can be equipped with a combination of up to six sensors: O2, CO/H2, NO, SO2, NO2 und COhigh
- CO room air monitoring
- qA mean value measurement as per 1st German Federal Immission Act BlmSchV
- Quick-access function keys for direct data access
- Measurement logs as QR code, database memory, customer data management
- 5 years warranty on O2, CO/H2 sensors
- 7 years full warranty in connection with a service contract
- CAPBs®-enabled
Flue gas analyser for measuring small and medium-sized oil, gas and pellets fired heating systems according to the German Federal Immission Act and for CO concentration safety checks at gas fired systems. Ideal for servicing solid fuel systems (for example, coal or wood fired systems with temporary CO peaks) or bivalent, modulating combined heating and power plants. If used within the framework of dust measurements, MULTILYZER STx determines the flue gas value and serves as the central controller for the dust measuring instrument STM 225.
Einsatzmedien
Schnittstellen
Zulassungen
Zielgruppe
measuring ranges (measured values)
- Flue gas temperature/differential temperature
- 0/1 150 °C
- Air temperature/combustion air temperature
- -20/+200 °C
- Draft
- -70/+70 hPa
- Differential pressure
- -150/+150 hPa
- barometric pressure
- 500/1 150 hPa
- Pitot
- 0.5/70 m/s
- O2 measurement
- 0/21 Vol.-%
- COH2 measurement
- maximum:
- 0/10 000 ppm
additional technical specifications
- Indication (calculated values)
- CO2, COunverdünnt, Lambda, Eta-Wirkungsgrad, Flue gas losses qA, Taupunkt, temperature difference, CO mg/m3 (Erdgas), CO mg/kWh (fuel oil)
- Operating temperature range
- Ambient:
- 5/40 °C
- Storage:
- -20/+50 °C
- weight (measuring instrument)
- 631 g (depends on equipment with sensors)
- Dimensions
- W x H x D:
- 90 x 220 x 53 mm
- Degree of protection
- IP 42 (EN 60529)
- Display
- TFT colour display 3.5 "
- W x H:
- 53 x 71 mm
- 240 x 320 pixels
- Connections
- Draft:
- ∅ 7 mm
- pressure:
- ∅ 7 mm
- Gas:
- ∅ 8 mm
- temperature:
- socket type K
- Supply voltage
- lithium-ion battery x (3.6 V/2900 mAh)
- power supply unit (mini USB)
- Battery or mains
- Hours of operation
- max. 12 Stunden
- Data memory
- microSD card, max. 32 GB
- Data logger
- 1-999 seconds, interval freely selectable
- Interfaces
- Infrared,
Bluetooth®,
QR code generator,
MicroSD-Kartenslot
- Approvals
- 1. BImSchV,
KÜO (TÜV ByRgG 301),
EN 50379-2
- Scope of delivery
- Measuring instrument
- Kalibrierprotokoll
- protective sleeve for device with magnets
- Netzteil NTE 5 USB-A
- Charging cable USB-A - mini USB
- MicroSD-Karte inkl. USB 2.0 SD-Card-Reader
- Base handle AWS-B for interchangeable probes 2.4 m condensate filter cartridge/draft
- Wechselsonde AWS-S 300 mm
- Condensate filter cartridge KFP
- Infiltec-Feinfilter (5 Stück)
- Teflon membrane (5 pieces)
- Umgebungsluftfühler TFB-UL 50-1
- connection kit ASS-DP
- Gerätekoffer
