Transducer UFS 01 for overfill prevention system (WHG)

AFRISO Messumformer UFS 01 AC 230V VOR 92730 92740 object_image_56060imagemain_en

AFRISO Messumformer UFS 01 AC 230V SAL 92730 92740

AFRISO Montagerahmen für AFRISO-WATCHDOG-LINE Warngeräte SAL 670 1370 1650 1920 2060 4230

AFRISO Dichtungsset IP54 für AFRISO-WATCHDOG-LINE Warngeräte DRA 690 1390 1940 2080 4260

AFRISO Messumformer UFS 01 AC 230V ANW 92730 92740

Data sheet Transducer UFS 01 for overfill prevention system (WHG)

Benefits

Compact, modern design
With visual/audible alarms, Test and Acknowledge buttons
2 relay outputs for additional alarm equipment, EMS, etc.
Supply voltage AC 230 V or AC/DC 15 - 40 V
Fail-safe, self-monitoring transducer for maximum reliability
Type-approved together with the level probes type 76 as part of an overfill prevention system
Connection of ancillary control unit type 907-Z as an additional control unit possible for connection to road tankers with overfill alarm system

Application

To avoid overfilling of stationary tanks and stationary-use tanks. Suitable for a wide range of flammable and non-flammable water-polluting liquids with a flash point of > 55 °C.

Versions

	Part no.	Remember
Transducer UFS 01 AC 230 V	53202
Transducer UFS 01 AC/DC 15–40 V	53216
Mounting frame	43521
Sealing kit IP 54	43416

Blue part no. = in-stock items

Downloads

	Description	Format
Data sheet Transducer UFS 01 for overfill prevention system (WHG)	Data sheet	PDF
Overfill prevention system NB 220 / UFS	Operating instructions	PDF
Mounting frame	Operating instructions	PDF
Sealing kit (IP 54)	Operating instructions	PDF
Overfill prevention system UFS	Declaration of Conformity	PDF

Description

Type-approved together with all level probes type series 76 and UFS 01 as part of an overfill prevention system. UFS 01 in a wall mounting housing consists of a transducer and a suitable level probe (to be ordered separately). The transducer contains all display elements and controls as well as all electronic components for signal processing and conversion of the level probe signal into a digital output signal. The level probe and the transducer are connected by means of a 2-wire signal cable. When the maximum permissible level is reached, UFS 01 triggers visual and audible alarms. The filling process is stopped. The transducer also features two output relays for connection of event reporting systems, the additional alarm unit ZAG 01 or additional equipment. Ancillary control unit type 907-Z can be connected as an additional control unit to enable connection to a road tanker with filling system.

Technical data

Operating temperature range

Ambient:

-20/+60 °C

Storage:

-20/+60 °C

Supply voltage

AC 230 V

Nominal power

< 10 VA

Switching output

Relay contact:

1 x voltage-free changeover contact
1 voltage-free normally open contact, can be acknowledged

Contact rating:

Max. AC 250 V, 2 A

Alarm sound

Min. 70 dB(A)

Housing

Wall mounting housing made of impact-resistant plastic (ABS)

W x H x D:

100 x 188 x 65 mm

Weight:

0.6 kg

Degree of protection:

IP 40 (EN 60529)

Approval

DIBt: Z-65.11-193