Heating pump assembly PrimoTherm® K 180-1 DN25 AP | 79136
Heating pump assembly PrimoTherm® K 180-1 DN25
- pre-assembled, tightness-tested and heat-insulated assembly
- modular system with flow at left or right
- easy, fast mounting
- available with high energy efficiency pump class A
Heating pump assembly for use in non-mixed heating circuits, specially for storage tank charging. It connects the heating boiler and the pipe system.
Comact, pre-assembled and tightness-tested heating pump assembly with all required functional components, form-fit heat insulation (complies with German Energy Saving Regulation) and wall mounting unit. Adhesive labels with pictograms allow for easy designation of the heating circuits.
The flow line consists of:
Combination valve with thermometer in the hand wheel (red mark, range 0/120 °C)
Ball valve below the pump
System connection G1½ male (boiler), G1 female (heating circuit) Suitable for pumps DN 25 with G1½ x 180 mm.
The return line consists of:
Combination valve with gravity brake, thermometer in the handle (blue mark, range 0/120 °C)
Pipe for length compensation with screw connection
System connection G1½ male (boiler), G1 female (heating circuit)
- Axis distance
- 125 mm
- system connections
- Boiler:
- G1½ male
- Heating circuit:
- G1 female
- Operating temperature range
- Medium:
- max. 95 °C
- Medium:
- short-term 120 °C
- System pressure
- max. 10 bar
max.
- Nominal size
- DN 25
- Flow coefficient Kvs
- 7.6 m³/h
- Heat insulation
- Polypropylene EPP
- Dimensions
- W x H x D:
- 248 x 400 x 155 mm
- Circulation pump
- AFRISO APH 361 25-7/180
- Length
- 180 mm
- Degree of protection
- IP 44 (EN 60529)
- Supply voltage
- AC 230 V, 50 Hz
- Energy efficiency class
- A
- Power input
- AFRISO APH 361 25-7/180: 4 − 45 W
- pumping head
- AFRISO APH 361 25-7/180: max. 7 m
- pumping volume
- AFRISO APH 361 25-7/180: max. 3.7 m³/h
- operating modes/settings
- AFRISO APH 361 25-7/180:
- Options
- Mixer and actuator, can be retrofitted
- andere Umwälzpumpen