Back
Heating pump assembly PrimoTherm® K 180-1 DN32 GP | 79503
Heating pump assembly PrimoTherm® K 180-1 DN32
manufactured goods
- pre-assembled, tightness-tested and heat-insulated assembly
- compact design
- available with high energy efficiency pump class A
- easy, fast mounting
Heating pump assembly for use in non-mixed heating circuits, specially for storage tank charging. It connects the heating boiler and the pipe system.
Complete, pre-assembled and tightness-tested heating pump assembly with all required functional components, form-fit insulation and wall mounting unit. System connection: Primary end (consumer) G1¼ female
The pump line (flow/hot) consists of:
Combination valve with thermometer in the hand wheel (red mark, range 0/120 °C)
Ball valve below the pump, suitable for use of pumps with 2" x 180 mm
System connection G1¼ female (heating circuit)
The return line consists of:
Combination valve with thermometer in the hand wheel (blue mark, range 0/120 °C)
Pipe for length compensation with gravity brake
System connection (boiler) G2 with screw connection G1¼ female (easy mounting and adapter G1½ AB for use with boiler manifold)
- Axis distance
- 125 mm
- system connections
- Boiler:
- G1¼ IG
- Heating circuit:
- G1¼ IG
- Operating temperature range
- Medium:
- max. 110 °C
- System pressure
- max. 10 bar
max. observe maximum pressure of circulation pumps used
- Nominal size
- DN 32
- Flow coefficient Kvs
- 21 m³/h
- Heat insulation
- Polypropylene EPP
- Dimensions
- W x H x D:
- 248 x 480 x 170 mm
- Circulation pump
- Grundfos UPM3(K) HYBRID 32-70 180 (N)
- Supply voltage
- AC 230 V, 50 Hz
- Power input
- Grundfos UPM3(K) HYBRID 32-70 180 (N):
- Grundfos UPM3(K) HYBRID 32-70 180 (N):
- Grundfos UPM3(K) HYBRID 32-70 180 (N):
- operating modes/settings
- Grundfos UPM3(K) HYBRID 32-70 180 (N):
- Options
- with high-efficiency pump EEI 0,2