Images 1
Back
tank withdrawal system Miniflex 3 (2.15) suction hose 2.15 m | 74300
tank withdrawal system Miniflex
in-stock items
- combination fitting made of brass as a withdrawal system with measuring line that screws into the tank
- green fuels ready: suitable for use at tank facilities filed with the new paraffinic fuels HVO or GTL
- quick-action shut-off valve with lever for remote closing in emergency situations
- materials resistant to biofuel and biodiesel mixtures with max. 30 % FAME
- PROOFED BARRIER if installed with vent hose
- watertight up to 10 m water column - ideal for use in flood hazard areas
For withdrawal of fuel oil from underground and aboveground tanks in single-line or dual-line mode. Suitable for fuel oil EL (DIN 51603-1), diesel fuel (EN 590), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as well as biofuel and biodiesel with a maximum of 30 % FAME (EN 14214). Also suitable for use with the new paraffinic fuels HVO or GTL as an admixture or 100%. Suitable for use in flood hazard areas and flood risk areas.
Combination fitting made of brass as a withdrawal system with measuring line that screws into the tank. Threaded female connection for suction and return lines. Universal compression fittings for pipes with 8 and 10 mm outside diameters for the suction line are enclosed. Measuring line connection for hose or pipe with 6 mm outside diameter. Quick-action shut-off valve with lever for remote closing in emergency situations. Pressure- and vacuum-tight up to 1 bar.
- Connection
- Tank:
- G1 male
- suction line/return line:
- G⅜ female
- Measuring line:
- 6 mm
- Length
- Suction hose:
- 2.15 m
- measuring hose
- Miniflex 3 (2.15): 2.15 m
- Test pressure
- max. 6 bar
- Flow rate
- max. 150 l/h
- Material
- Screw fitting:
- Messing
- Suction hose:
- NBR/PVC
- Bottom part:
- Zamak (ZnAl4Cu1)
