Skip to main content
Back

Stainless steel heating circuit manifold ProCalida® VA 1C DFM 6 HK | 86406

Stainless steel heating circuit manifold ProCalida® VA 1C DFM 6 HK

in-stock items

  • Flow meter can be cleaned with system pressure present
  • fast and safe mounting with union nut (flat-sealing)
  • sound-absorbing plastic wall bracket with quick mounting function
  • 100 % tightness-tested and function-tested

Manifold system for surface heating systems and cooling systems. For distribution of heating and cooling circuit water as per VDI 2035 or of water/glycol mixtures in sealed systems. Suitable for 2 – 12 heating/cooling circuits.

Stainless steel heating circuit manifold with polished surface. Return with stroke valves for actuators. Return valves with dual O ring seal at the valve axis. Valve disc with O ring seal for permanently reliable closing of the control circuits. Flow with flow meters that can be shut off. Control range flow meter 0.5 to 4 l/min with locking as per EN 1264-4.
The valves can be shut off and regulated for hydraulic balancing of radiator, wall or underfloor heating systems. When the system is shut off, the pre-adjustment is not lost for compliance with EN 1264-4. Windows can be cleaned and replaced with system pressure present. Main connection with union nut G1. With filling and drain valve as well as manual air vent in the end module. Connection by means of angular connection pieces and/or ball valve G1. Easy mounting by means of plastic wall bracket with excellent sound-absorbing characteristics and with quick mounting function – the manifold is snap-mounted to the wall bracket. Suitable for standard manifold cabinets. With a sufficient distance between the flow and return bars, for easy, collision-free mounting even in the case of large actuators and heating circuit pipes up to 20 mm. AFRISO stainless steel manifold systems are 100 % tightnesstested and function-tested.

Number of heating/cooling circuits
6
Medium
Heating circuit water and cooling circuit water as per VDI 2035
(Water/glycol mixtures with an admixture of max. 50 %)
Test pressure
max. 6 bar
Manifold pipe
Stainless steel 304
Main connection
G1 flat-sealing, with union nut
Connection from the right or from the left
Connection heating/cooling circuit
G¾ male thread, eurocone
suitable for standard compression fittings
Operating temperature range
Medium:
-20/+90 °C at 3 bar,
-20/+80 °C bei 4 bar,
-20/+70 °C at 5 bar,
-20/+60 °C bei 6 bar
wall bracket
impact-resistant plastic with rubber support,
erfüllt DIN 4109,
suitable for standard manifold cabinets
Bar distance   220 mm
Flow meter
can be shut off and regulated, with pre-adjustable adjustment ring
Range:
0.5/4 l/min
Mounting position:
any
Accuracy:
± 10 %, with reference to the full scale value
return valves
mating thread:
M 30 x 1.5 mm
Closing force:
> 70 N
Closing dimension:
12 ± 0.6 mm
(open position 15 mm)
Flow coefficient Kvs:
1.93 m³/h
Compatibility
suitable for electro-thermostatic actuators TSA-01/-02/-03 from AFRISO or standard actuators with union nut M30 x  1.5 mm and closing dimensions between 10.3 and 11.0 mm
Options
  • dynamic return valve Vario-DP for automatic hydraulic balancing
  • Endmodul Messing, vernickelt

Click the corresponding image for detail views, additional information and dimension tables.

DOK_KAT_PIN_PROCALIDA_VA1C_DFM_EN.PDF

Heating circuit manifold ProCalida VA 1C

PDF