Images 2
Back
Level sensors GWG 23-T 1000 grey | 47623
Level sensors GWG 23-T for outdoor tanks
in-stock items
- for fuel oil EL, diesel fuel, biofuel/biodiesel and petrol
- metallised sleeve for permanent operation even with biofuel/biodiesel
- variable height adjustment
- materials resistant to biofuel and biodiesel with max. 100 % FAME
- green fuels ready: suitable for use at tank facilities filed with the new paraffinic fuels HVO or GTL
- watertight up to 10 m water column - ideal for use in flood hazard areas
Part of a control chain for overfill alarm systems. The level sensor helps to prevent overfilling of tanks. For tanks as per EN 12285-1, 12285-2, DIN 6618, 6619, 6623, 6624, 6608, 4119 and tanks as per DIN 6620 and DIN 6625 or equivalent tanks.
Suitable for fuel oil (DIN 51603-1), diesel fuel (EN 590), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as well as biofuel and biodiesel with up to 100 % FAME (EN 14214). Also suitable for use with the new paraffinic fuels HVO and GTL as an admixture or 100% or of petrol under certain conditions. See the operating instructions for additional information.
PTC thermistor type level sensor consisting of height-adjustable probe and screw fitting. Pressure- and vacuum-tight. Watertight up to 10 m water column.
GWG 23-T with telescopic tube for height adjustment of the connection fitting. Tube fitting made grey plastic, shock-resistant, with tie, without flange gasket. With metallised sleeve.
When selecting a level sensor, please check to see that the fitting is as close as possible below the access chamber cover – the distance should be no less than 20 mm and no more than 300 mm. See the operating instructions for the adjustment dimension in the tank.
- Probe length
- 1000 mm
- Process connection
- Screw fitting G1
- Operating temperature range
- Medium:
- -25/+50 °C
- Ambient:
- -25/+60 °C
- Operating pressure in the tank
- without pressure
- Material
- GWG level sensor fitting:
- Plastic
- Probe tube:
- steel, galvanised
- Screw fitting:
- Brass
- PTC thermistor:
- glass-encapsulated
- GWG level sensor sleeve:
- plastic, metallised
- approval
- CE marking as per EC Construction Products Regulation 305/2011, EU 574/2014, EN 13616:2004
