Images 3
Back
Flue gas analyser EUROLYZER® S1 set Pro O2, CO/H2+, draft, pressure | P00141
Flue gas analyser EUROLYZER® S1 set Pro
in-stock items
- Robust professional set in high-quality hardtop case
- Device with pressure connection for pressure and tightness test up to 180 mbar
- Modular probe system with large condensate filter cartridge for flexible use and even longer protection
- large high-resolution display for optimum readability and and intuitive menu navigation, protected by scratch-resistant glass
- Pioneering "dual-mode concept": Intuitive one-hand operation via scroll wheel or touch display – sensitive even with work gloves
- Ready for all typical HVAC measuring tasks thanks to Bluetooth® connection to more than 35 sensor modules and sets of the CAPBs® system
- TÜV-tested measurement as per 1st and 44th BlmSchV (German Federal Immission Act)
- NO sensor can be retrofitted
- H2-compensated robust CO sensor (measuring range up to 10,000 ppm)
- configurable macros for repetitive tasks
- Multi-memory: Combine up to six different measurements into a single measurement report (for example, full load measurement/partial load measurement or flue gas measurement and flow pressure measurement)
- Data transmission via Bluetooth® or QR code to the AFRISO app EuroSoft® connect for on-site documentation
- 5 years warranty on O2 sensor
- 7 years full warranty in connection with a service contract
Designed for flue gas measurements at oil, gas and pellets fired systems as well as for tightness tests at gas lines, for checking the connection pressure/flow pressure and the pressure loss. TÜV-tested measurements as per 1st and 44th BlmSchV (German Federal Immission Act) can be performed reliably and intuitively. Fast and easy Bluetooth® connection to more than 35 sensor modules and sets of the AFRISO CAPBs® make EUROLYZER® S1 the central controller for all HVAC tasks.
Einsatzmedien
Produkteigenschaften
Schnittstellen
Zulassungen
measuring ranges (measured values)
- Flue gas temperature/differential temperature
- 0/1 150 °C
- Air temperature/combustion air temperature
- -20/+200 °C
- Draft
- -70/+70 hPa
- Differential pressure
- -150/+150 hPa
- O2 measurement
- 0/21 Vol.-%
- COH2 measurement
- nominal:
- 0/4 000 ppm
- maximum:
- 0/10 000 ppm
additional technical specifications
- Indication (calculated values)
- CO2, COunverdünnt, Lambda, Taupunkt, Eta efficiency, Abgasverluste qA, CO mg/m3 (natural gas), CO mg/kWh (Heizöl)
- Operating temperature range
- Ambient:
- 0/40 °C
- Storage:
- -20/+50 °C
- weight (measuring instrument)
- 500 g
- Dimensions
- W x H x D:
- 80 x 218 x 44 mm
- Degree of protection
- IP 42 (EN 60529)
- Display
- high-resolution display 4.3 "
- Connections
- Draft:
- ∅ 7 mm
- pressure:
- ∅ 8 mm
- Gas:
- ∅ 8 mm
- temperature:
- 2 x socket type K
- Supply voltage
- lithium-ion battery (3.6 V/5000 mAh)
- Power supply unit (USB-C)
- Battery or mains
- Hours of operation (eco mode)
- 12 Stunden
- Data memory
- internal memory, 10000 Messungen
- Interfaces
- Infrared,
Bluetooth®,
QR code generator,
USB-C
- Approvals
- TÜV-tested as per 1st and 44th BImSchV,
DIN EN 50379-1/2
- Scope of delivery
- Flue gas analyser EUROLYZER® S1 (O2, CO/H2+, draft, pressure)
- mit integrierten Haftmagneten im Gehäuse
- Calibration report
- Schnelllade-Netzteil NTE 5 SF
- charging cable USB-A to USB-C (1 m)
- 5 x Infiltec-Feinfilter
- 5 x Teflon membrane
- Kondensatfilterpatrone KFP
- Base handle AWS-B for interchangeable probes
- Wechselsonde AWS-S 180 mm
- ambient air probe TFB-UL 50-1
- Schlauch für Gas-Anschlussdruck
- Hard top case Pro blue
Modular probe system
Abb.
Bezeichnung
Base handle AWS-B compensation line 2.4 m, with condensate filter cartridge KFP, with draft | 510921
Flue gas probe plug-in units
Abb.
Bezeichnung
Thermal printer EUROprinter
Abb.
Bezeichnung
Soot pumps RSP
Interfaces
Abb.
Bezeichnung
Temperature probes
Abb.
Bezeichnung
Power supply units and charging cables
Abb.
Bezeichnung
Condensate filter cartridges KFP
Abb.
Bezeichnung
Filters
Hoses
Abb.
Bezeichnung
Pitot tubes
Abb.
Bezeichnung
