Images 4

Back

Pressure transducers DeltaFox DMU 20 D | 33409R010541

Pressure transducers DeltaFox DMU 20 D Version for differential pressure measurement

manufactured goods

Manuals

Measuring range	0/4 mbar
Connection	hose olive ⌀ 6.6 x 11 mm
Electrical connection	Cable gland M16 x 1.5
Part no.	33409R010541

multiple-range transmitter with up to 3 switchable measuring ranges
easy parameterisation via 2-line LC display
Min./Max. value indication
ideal for clean room and filter monitoring

The differential pressure transducer DMU 20 D can be used with all dry, gaseous, non-corrosive media. The device detects even smallest differential pressures and is particularly suitable for heating, air conditioning and ventilation applications. Clean rooms and filter monitoring are other application areas.

The devices equipped with silicon sensors. When pressure is applied, the pressure difference between the positive side and the negative side is converted into a current and voltage signal which is proportional to the differential pressure. The 2-line LC display shows the measured value and the unit and optionally the status of the switching outputs. The customer can parameterise up to three measuring ranges.

Measuring accuracy

: Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)

< 0/6 mbar:: ≤ ± 1 % FSO (BFSL)

Display: 2-line LC display,
sichtbarer Bereich 32,5 x 22,5 mm,
5-digit 7-segment main display,
Ziffernhöhe 8 mm,
range ± 9,999,
8-stellige 14-Segment-Zusatzanzeige,
height 5 mm, 52-segment bar chart,
Genauigkeit 0,1 % ± 1 Digit,
pressure units switchable mbar, bar, Pa, hPa, kPa, psi, Atm, torr, mmHg

: 0/4 mbar

Long-term stability

< 0/6 mbar:: ≤ ± 0.5 % FSO/Jahr

Operating temperature range

Medium:: 0/50 °C

Ambient:: 0/50 °C

Storage:: -10/+70 °C

Housing

W x H x D:: 132 x 68.5 x 50 mm

Process connection

: hose olive ⌀ 6.6 x 11 mm (for flexible hoses with ID 6 mm)

material

Housing:: Plastic (ABS)

Process/pressure connection:: Brass, nickel-plated

Sensor:: Ceramic, Silikon, epoxy, RTV

wetted parts: pressure connection, PVC/Silikonschlauch, Sensor

Supply voltage

: DC 19 − 32 V

Output signal

: 3-wire, 0/4–20 mA and 0–10 (5) V

Load

0/4–20 mA:: R_max = 330 Ω

0–10 V:: R_min = 10 kΩ

electrical protection: short circuit proof and protected against reverse polarity

Electrical connection

: Cable gland M16 x 1.5

Degree of protection: IP 54 (EN 60529)

CE conformity: EMC Directive 2014/30/EU
RoHS-Richtlinie 2011/65/EU

Click the corresponding image for detail views, additional information and dimension tables.