En 
... DMU 01 VM 31620 DMU 01 VM -1/+1,5bar G1/2B
31620
PRO_TEC_VOR_DMU01_VM_31625.TIF
PRO_TEC_SAR_DMU01_VM_31625.TIF
PRO_TEC_DRA_DMU01_VM_31625.TIF
PRO_TEC_RUE_DMU01_VM_31625.TIF
PRO_TEC_SCD_DMU01_VM.TIF
PRO_TEC_VOR_DMU01_VM_31625.TIF
PRO_TEC_SAR_DMU01_VM_31625.TIF
PRO_TEC_DRA_DMU01_VM_31625.TIF
PRO_TEC_RUE_DMU01_VM_31625.TIF
PRO_TEC_SCD_DMU01_VM.TIF
Images 5
Back

Pressure transducers DMU 01 VM | 31620

Pressure transducers DMU 01 standard version

manufactured goods
Manuals

Measuring range-1/+1.5 bar
ConnectionG½B
ConnectionDIN 3852 type E
Electrical connectionConnector and junction box as per ISO 4400 (DIN 43650-A, EN 175301-803)
Part no.31620

  • proven ceramic technology
  • no mechanical ageing of the measuring cell
  • no transmission liquid
  • Versions for relative pressure and absolute pressure
  • small temperature error

For electronic pressure measurement in industrial applications (such as hydraulic and pneumatic applications as well as mechanical and plant engineering).

Pressure transducers convert physical pressure into an electrical signal proportional to the pressure. DMU 01 is equipped with a piezo-resistive thick-film ceramic measuring cell.

Measuring accuracy
Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
< ± 0.5 % FSO
-1/+1.5 bar
Overpressure safety
< 250 bar:
at least 2 x FS
Burst pressure
< 400 bar:
at least 3 x FS
Operating temperature range
Medium:
-25/+125 °C
Ambient:
-25/+85 °C
Storage:
-40/+85 °C
Temperature error band
≤ ± 0.3 % FSO/10 K ≤ ± In compensated range -25/+85 °C
dynamic characteristics
Response time:
≤ 10 ms
Process connection
G½B DIN 3852 type E with protruding diaphragm
material
Housing:
Stainless steel 304
pressure connection:
Stainless steel 304
diaphragm:
ceramic (Al2O3 96 %)
Seal:
FKM (Viton)
Supply voltage
DC 8 − 32 V
Output signal
2-wire, 4–20 mA
Load
Rmax = [(UB – UBmin)/0.02 A] Ω
Current input
< 25 mA
electrical protection
short circuit proof and protected against reverse polarity
Electrical connection
Connector and junction box as per ISO 4400 (DIN 43650-A, EN 175301-803)
Degree of protection
IP 65 (EN 60529)
CE conformity
EMC Directive 2014/30/EU
RoHS-Richtlinie 2011/65/EU
Pressure Equipment Directive 2014/68/EU

Click the corresponding image for detail views, additional information and dimension tables.

DMU 01 VM mit Anschluss G½B DIN 3852-Form E mit vorgezogener Membrane

PRO_TEC_BEF_DMU01_VM_DE_S.TIF

AFRISO_DATENBLATT_DRUCKMESSUMFORMER_DMU-01-VM_31620_DEU_CHE.PDF

Pressure transducers DMU 01 VM 31620

datasheet variant
Industrial technology
PDF
DMU01-03-04-05-08-08T.PDF

Pressure transducers DMU 01, DMU 03, DMU 04, DMU 05, DMU 08, DMU 08T

Declarations of Conformity
PDF
OPTIONEN_DMU01_563_EN.PDF

Pressure transducers DMU 01

Catalogue options
Industrial technology
PDF
900_100_0831.PDF

pressure transmitters / screw-in probes DMU 01, DMU 01 K, DMU 03, DMU 03 HD, DMU 04, DMU 05P, DMU 07, DMU 07 FG

operating instructions
PDF
AFRISO_DMU_MISURAZIONE_ELETTRONICA_IT_08-14.PDF

electronic pressure measurement - pressure transducers DMU series

brochures
PDF

Related products