En 
... EDS 10 R 33405R01123011 EDS 10 R 2xPNP 0/600bar G1/2 DIN3852 FKM
PRO_TEC_SAL_EDS10_33405_1.TIF
PRO_TEC_VOR_EDS10_33405.TIF
PRO_TEC_SAR_EDS10_33405_2.TIF
PRO_TEC_RUE_EDS10_33405.TIF
PRO_TEC_SAL_EDS10_33405_1.TIF
PRO_TEC_VOR_EDS10_33405.TIF
PRO_TEC_SAR_EDS10_33405_2.TIF
PRO_TEC_RUE_EDS10_33405.TIF
Images 4
Back

Pressure switches EDS 10 | 33405R01123011

electronic pressure switch EDS 10

manufactured goods
Documents

  • 4-digit LED display
  • Display can be rotated and tilted to any position
  • 2 PNP switching outputs
  • accuracy ≤ ± 0.35 % at 400 mbar and higher
  • measuring range selection from 100 mbar to 600 bar

Main application areas comprise monitoring of gaseous or liquid media in plant and mechanical engineering. The pressure switch lends itself to pneumatic or hydraulic systems requiring high switching accuracy. The display can be rotated and tilted to practically any position so that the device can be used under adverse mounting conditions.

The device uses a piezo-resistive stainless steel measuring cell. The 4-digit LED display of the pressure switch EDS 10 can be rotated by 330° and tilted by 300°. The switching points (switching hysteresis) are via the menu and two keys. The status of the switching outputs is indicated by an LED each. At a nominal pressure of ≥1, the pressure switch is vacuum-tight without limitations.

Measuring accuracy
Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
> 0/0.4 bar ≤ ± 0.35 % FSO
Long-term stability
≤ ± 0.3 % FSO/Jahr ≤ ±
Display
4-digit, 7-segment, LED display, red,
Anzeigebereich -1.999/+9.999,
visible area 22.5 x 10.5 mm,
4 LEDs für umschaltbare Druckeinheiten (bar, mbar, psi, MPa),
Status indication switching output,
Schaltausgang 1: grüne LED,
Switching output 2: yellow LED
Measuring range
0/600 bar
Overpressure safety
600 bar: 1,000 bar
Burst pressure
at least 3 x FS
Operating temperature range
Medium:
-40/+125 °C
Ambient:
-40/+85 °C
Storage:
-40/+100 °C
Process connection
G½ (DIN 3852)
material
Housing:
plastic (PA 6.6), highly impact-resistant and corrosion-resistant
pressure connection:
Stainless steel 316 L
diaphragm:
Stainless steel 316 L
Seal:
FKM (Viton)
Supply voltage
DC 18 − 30 V
Current input
< 40 mA
switching outputs
2 open collector (PNP), SIO mode, max. 125 mA
Switching delay:
0 to 50 s
repeatability:
≤ ± 0.1 % FSO
switching cycles:
> 100 x 106
Switching frequency:
max. 200 Hz
Electrical connection
Connector M12 x 1, 4-pin, Metal
Degree of protection
IP 67 (EN 60529)
CE conformity
EMC Directive 2014/30/EU
RoHS-Richtlinie 2011/65/EU
Pressure Equipment Directive 2014/68/EU (module A)

AFRISO_PRESSURE-SWITCHES-EDS-10-ELECTRONIC-PRESSURE-SWITCH_33405R01123011_ENG_GBR.PDF

AFRISO_DRUCKSCHALTER-EDS-10-ELEKTRONISCHER-DRUCKSCHALTER_33405R01123011_DEU_DEU.PDF

Data sheets
Industrial technology
PDF
AFRISO_ELECTRONIC-PRESSURE-SWITCH_ENG_GBR_20260209_233943605.PDF

AFRISO_ELEKTRONISCHER-DRUCKSCHALTER_DEU_DEU_20260210_004356945.PDF

Data sheets
Industrial technology
PDF
EDS10.PDF

Druckschalter EDS 10

Declarations of Conformity
PDF
S619_EDS10_EN.PDF

Elektronischer Druckschalter EDS 10

Catalogue ordering code
PDF
900_100_0844.PDF

Druckschalter EDS 10

Manuals
PDF

Related products