Images 2
Back
capacitance level indicator CapFox® EFT 20 MS -22 HT | 5655022HT-L-5B01
capacitance level indicator CapFox® EFT 20
in-stock items
- easy adjustment via magnetic pin
- Degree of protection IP 68 with fixed cable connection
- for tank heights of 100 mm and more
- EX version suitable for mining
Capacitance level indicator with 2-wire or 3-wire technology for continuous level measurement of liquids and bulk solids (flour, sand, cement, plastic granules) in open and closed container, tanks or silos. Particularly suitable for low tank heights.
The capacitance level indicator CapFox® EFT 20 detects the change in electrical capacitance caused by the change in level and converts the amount of change into a current signal (4–20 mA) or a voltage signal (0–10 V). The electronics module is contained in a robust stainless steel housing. Flexible probes or rod probes are available as measurement electrode. For level measurement of adhesive, corrosive or electrically conductive media, the electrodes are available with an insulating coating. If media are stored in tanks made of non-conductive materials or in open containers, the probes must be equipped with an additional coax reference pipe or an earth electrode.
- Indicator
- LED green:
- Operation
- LED orange:
- status
- max. measuring range
- MS: ≤ 2000 mm
- (specify exact probe length when ordering)
- Operating temperature range
- Medium:
- -40/+300 °C
- Flange
- HT version:
- -40/+200 °C
- Ambient:
- -30/+85 °C
- Process connection
- Tri-Clamp DIN 32676, ⌀ 50.5 mm
- material
- Housing:
- Stainless steel 304
- Probe
- MS: Stainless steel 316 L
- Supply voltage
- DC 9 − 34 V
- Output signal
- 4–20 mA, 2-wire
- Current input
- max. 20.4 mA
- Load
- Rmax = 700 Ω at U = 24 V
- Degree of protection
- IP 68 (EN 60529)
- Electrical connection
- Cable gland M12 x 1.5 with fixed cable connection
- Cable length:
- 2 m
- Weight
- HT version: ca. 0.6 kg
- Scope of delivery
- CapFox® EFT 20 according to configuration
- Magnetstift
