Measuring accuracy
Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
< 0/6 mbar:
≤ ± 1 % FSO (BFSL)
≥ 0/6 mbar:
≤ ± 0.5 % FSO (BFSL)
Display
2-line LC display,
Visible area 32.5 x 22.5 mm,
5-digit 7-segment main display,
Character height 8 mm,
Range ± 9,999,
8-digit 14-segment additional display,
Height 5 mm, 52-segment bar chart,
Accuracy 0.1 % ± 1 digit,
Pressure units switchable mbar, bar, Pa, hPa, kPa, psi, Atm, torr, mmHg
Measuring range
See ordering table
Long-term stability
< 0/6 mbar:
≤ ± 0.5 % FSO/Jahr
≥ 0/6 mbar:
≤ ± 0.2 % FSO/Jahr
Operating temperature range
Medium:
0/50 °C
Ambient:
0/50 °C
Storage:
-10/+70 °C
Housing
W x H x D:
132 x 68.5 x 50 mm
Process connection
Hose olive ⌀ 6.6 x 11 mm (for flexible hoses with ID 6 mm)
Hose olive ⌀ 4.4 x 10 mm (for flexible hoses with ID 4 mm)
Material
Housing:
Plastic (ABS)
Process/pressure connection:
Brass, nickel-plated
Sensor:
Ceramic, Silicone, epoxy, RTV
Wetted parts
Pressure connection, PVC/silicone hose, Sensor
Supply voltage
DC 19 – 32 V
Output signal
3-wire, 0/4–20 mA and 0–10 (5) V
Load
0/4–20 mA:
Rmax = 330 Ω
0–10 V:
Rmin = 10 kΩ
Electrical protection
Short circuit proof and protected against reverse polarity
Electrical connection
Cable gland M16 x 1.5
Degree of protection
IP 54 (EN 60529)
CE conformity
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
