Images 3
Back
Fuel oil de-aerators Flow-Control 3/K HT | 69929
automatic fuel oil de-aerator Flow-Control 3/K HT
manufactured goods
- high temperature version: Up to a temperature of the medium of 80 °C
- Dual float safety system keeps oil foam from escaping
- increased fuel oil filter service life - the amount of oil drawn from the tank corresponds exactly to the oil actually burnt
- no unnoticed leakage in the return line
- materials resistant to biofuel and biodiesel with max. 100 % FAME
- PROOFED BARRIER if installed with vent hose
- watertight up to 10 m water column - ideal for use in flood hazard areas
For single-line systems with return line in oil-fired systems for continuous de-aeration. Suitable for fuel oil EL (DIN 51603-1), diesel fuel (EN 590), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as well as biofuel and biodiesel with up to 100 % FAME (EN 14214). This product is therefore ideal for all ecologically upgraded fuel oil consuming systems that use the new paraffinic fuels HVO or GTL as an admixture or 100 %. Also for use in flood hazard areas and flood risk areas.
Flow Control 3/K HT is recommended for mounting below the max. fuel level in the tank and for any application requiring particular safety.
Automatic fuel oil de-aerator consisting of a diecast zinc housing with female G¼ connection thread at the tank end and male G⅜ connection threads with 60° cone at the burner end for connection of the burner hoses. An oil hose with ball-shaped sealing for 60° cone and a G⅜ union nut is supplied for connection to the fuel oil filter. The de-aerator hood consists of glass-fibre reinforced plastic (not transparent), all seals are made of FKM. Flow-Control 3/K HT features 2 separate float chambers. The lower float chamber contains the operating float; the upper float chamber contains the safety float. The upper float chamber keeps oil foam from escaping via the vent opening (e.g. during commissioning/filter exchange) and also indicates malfunctions of the vent valve. The risk of a leak in the return line going unnoticed is removed with the single-line system. It is no longer necessary to regularly check the return line for leaks. Also suitable for pressure mode up to 0.7 bar. Watertight up to 10 m water column.
- connection burner end
- G⅜ male with 60° cone for burner hoses
- Connection tank
- G¼ female or oil hose G¼ male x G⅜ union nut for connection to filter
- Nozzle capacity
- max. 100 l/h
- Return flow
- max. 120 l/h
- Separating capacity air/gas
- ca. 4 l/h
- Mounting position
- Float housing vertical to the top
- seals
- FKM
- Operating temperature range
- Medium:
- max. 80 °C
- Ambient:
- max. 60 °C
- Operating overpressure
- max. 0.7 bar
- (corresponds to static oil column of approx. 8 m)
- Test pressure
- 6 bar
- Dimensions (W x H x D)
- 95 x 147 x 95 mm
- Material
- Housing:
- Zinc die cast
- De-aerator hood:
- plastic, glass-fibre reinforced
- Test
- TÜV-tested (S 556 2021 S1)
- approval
- Conformity certificate (ÜHP) as per EN 12514
