En 
... DMU30 PVC cable, 2-wire Ex version G¼B DMU 30211150202 DMU 30 Kabel 0/16bar G1/4B Ex
DMU_30211150202
PRO_TEC_VOR_DMU30_36999_1.TIF
PRO_TEC_DRA_DMU30_36999.TIF
PRO_TEC_RUE_DMU30_36999_4.TIF
PRO_TEC_SCD_DMU_30_ANSCHLUSS_G1-4B_KABEL.TIF
PRO_TEC_VOR_DMU30_36999_1.TIF
PRO_TEC_DRA_DMU30_36999.TIF
PRO_TEC_RUE_DMU30_36999_4.TIF
PRO_TEC_SCD_DMU_30_ANSCHLUSS_G1-4B_KABEL.TIF
Images 4
Back

Pressure transducers DMU 30 | DMU_30211150202

Pressure transducers DMU 30 Industrial version

manufactured goods
Manuals

Measuring range0/16 bar
ConnectionG¼B
ConnectionEN 837-1/7.3
Electrical connectionCable outlet with PVC cable
Part no.DMU 30211150202

  • for pressure ranges up to 1,000 bar
  • suitable for high overloads
  • insensitive to pressure peaks
  • Ex version (optional)

For electronic pressure measurement in machines and systems with technical gases (e.g. oxygen, oil-free, grease-free) and for use in hydrogen applications.

Pressure transducers convert physical pressure into an electrical signal proportional to the pressure. DMU 30 is equipped with a welded stainless steel measuring cell.

Measuring accuracy
Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
< ± 0.5 % FSO
Long-term stability
≤ ± 0.2 % FSO/Jahr ≤ ± at reference conditions
0/16 bar
Overpressure safety
16 bar:
at least 3 x FS
Burst pressure
< 600 bar:
at least 5 x FS
Vacuum resistance:
unlimited
Operating temperature range
Medium:
-40/+125 °C
Ambient:
-40/+100 °C
 in Ex zZone 0:
-20/+60 °C
 from Ex zone 1:
-20/+70 °C
Storage:
-40/+85 °C
Temperature error band
≤ ± 0.2 % FSO/10 K ≤ ± In compensated range -25/+85 °C
dynamic characteristics
Response time:
≤ 10 ms
Process connection
G¼B (EN 837-1/7.3)
material
Housing:
Stainless steel 316 L
pressure connection:
Stainless steel 316 L
diaphragm:
Stainless steel 316 L
Seal:
without (welded)
Degree of cleanliness:
oil- and grease-free version, based on ISO 15001
Residual particles:
no particles > 100 µm (with reference to 10 dm2)
Residual grease:
Residual grease content < 0.2 mg/dm2
Supply voltage
Ex version:
DC 10 − 28 V
Output signal
4–20 mA, 2-wire
Load
Rmax = [(UB – UBmin)/0.02 A] Ω
Current input
< 25 mA
electrical protection
short circuit proof and protected against reverse polarity
Electrical connection
Cable outlet with PVC cable
Degree of protection
IP 67 (EN 60529)
CE conformity
EMC Directive 2014/30/EU
RoHS-Richtlinie 2011/65/EU
Pressure Equipment Directive 2014/68/EU

Click the corresponding image for detail views, additional information and dimension tables.

elektrische Anschlüsse

PRO_TEC_BEF_DMU_30_KABELAUSGANG.TIF

Anschluss G¼B (EN 837-1/7.3)

PRO_TEC_BEF_DMU_30_ANSCHLUSS_G1-4.TIF

AFRISO_DATENBLATT_DRUCKMESSUMFORMER_DMU-30_DMU-30211150202_DEU_CHE.PDF

Pressure transducers DMU 30 DMU 30211150202

datasheet variant
Industrial technology
PDF
MEASUREMENT_TECHNOLOGY_APPLICATIONS_HYDROGEN_EN.PDF

Measurement technology applications für hydrogen

Flyers
PDF
S610_DMU30_EN.PDF

Pressure transducers DMU 30 industrial version

Catalogue ordering code
PDF
900_100_1073-00.PDF

Pressure transducers DMU 30 industrial version

operating instructions
Industrial technology
PDF
AFRISO_DMU_MISURAZIONE_ELETTRONICA_IT_08-14.PDF

electronic pressure measurement - pressure transducers DMU series

brochures
PDF

Related products