Skip to main content

Öl-Wasser-Warngeräte ÖWWG 3 - Brenner-Anschluss

  • Connections pre-wired
  • with visual/audible alarms, Test and Acknowledge buttons
  • automatic switching off of the burner in alarm conditions
  • EnOcean-ready: Can be smart-home-enabled for AFRISOhome (can be retrofitted)

For visual and audible alarms in the event of accumulations of liquids below the burner of an oil fuelled system and for switching off the burner in alarm conditions. Suitable for the following media: water, fuel oil and diesel fuel.

The ÖWWG 3 oil/water alarm unit consists of a control unit with visual/audible alarm, Test and Acknowledge buttons as well as a flexible PTC thermistor probe. Cable and connector for connection of burner and boiler are fully wired and ready to be connected. In the event of an alarm, the unit triggers visual and audible alarms and switches off the burner. The audible alarm can be muted with the Acknowledge button. The visual alarm remains active until the leak has been removed. The burner then resumes operation. The Test button allows you to simulate an alarm condition in order to perform a function test. Alarm units with the EnOcean-ready label can be integrated into your existing building automation systems, for example, AFRISO smart home, at a later point in time. To do so, plug the EnOcean® wireless module into the EnOcean® interface (PCB of the device). The AFRISOhome gateway in conjunction with additional AFRISO smart home products with EnOcean® wireless technology allow you to configure a whole range of fully customisable, extensible features for the protection of plants and buildings.

Operating temperature range
Ambient:
-5/+40 °C
Storage:
-10/+60 °C
Probe
L x ⌀:
57 x 14 mm
connector
Burner:
7-pin, female with 3 m cable
Boiler:
7-pin, male, with 3 m cable
Supply voltage
AC 100 − 240 V
Nominal power
  10 VA
Switching output
Relay contact:
1 x voltage-free changeover contact
Contact rating:
max. AC 250 V, 2 A
Alarm sound
min. 70 dB(A)
Housing
Wall mounting housing made of impact-resistant plastic (ABS)
W x H x D:
100 x 188 x 65 mm
Weight:
  600 g
Degree of protection:
IP 40 (EN 60529)
approval
DIBt: Z-65.40-339
Scope of delivery
  • Control unit
  • 1 angeschlossene Kaltleitersonde
  • one connected plug each for burner and boiler connection
Option
  • EnOcean® wireless module (can be retrofitted)

AFRISO_WATCHDOG-LINE_ALARM_UNITS_EN_05-14.PDF

WATCHDOG-LINE Warngeräte

PDF
854_000_0529.PDF

Öl-Wasser-Warngerät ÖWWG 3 mit Brenner-Anschluss-Set

PDF
Download