Skip to main content

PrimoTherm 180-3 DN32 RTA

  • for increased return temperature with solid fuel boilers
  • with temperature-controlled condensation protection valve
  • for reduced amounts of condensate in the combustion process
  • avoids deposits in the boiler and in the smoke vent
  • ErP-ready: Electronics with increased energy efficiency reduces negative impact on the environment

Heating pump assembly for automatically controlling the return temperature of the system water to the heat generator to the value adjusted in the valve. An integrated, temperature-controlled condensation protection valve is the connection between the solid fuel heating system and the heating circuit or the hot water storage tank. Using PrimoTherm® 180-3 RTA keeps the temperature in the heating boiler above the condensation point in all operating states. This avoids deposits in the boiler and in the smoke vent and increases the service life of the system; corrosion damage of the heating boiler and chimney fires caused by soot deposits are avoided.

Complete, pre-assembled and tightness-tested heating pump assembly with all required functional components, form-fit insulation and wall mounting unit.
The pump line (return) consists of:
Combination valve with thermometer in the hand wheel (blue mark, range 0/120 °C)
Ball valve above the pump
3-way mixing valve with fixed mixing temperature 60 °C
System connection G1 female (boiler), G1 female (storage)
Suitable for pumps DN 32 with G2 x 180 mm
The flow line (hot) consists of:
Combination valve with gravity brake, thermometer in the handle (red mark, range 0/120 °C)
Pipe for length compensation with gravity brake and screw connection

SYSTEM-ASSEMBLIES-DOMESTIC-TECHNOLOGY-BROCHURE-21-04.PDF

Systembaugruppen für die Haustechnik

PDF
900_000_0717.PDF

Heizungspumpengruppe PrimoTherm® 180-1 DN 32, 180-2 DN 32, 180-3 DN 32 RTA

PDF
Download