En 
... Miniflex 3 74310 Miniflex 3 3,15m Ms
PRO_TEC_VOR_MINIFLEX_3_KOPF_74300.TIF
PRO_TEC_VOR_MINIFLEX_3_KOPF_74300.TIF
Images 1
Back

Miniflex 3 | 74310

tank withdrawal system

in-stock items
Documents

  • combination fitting made of brass as a withdrawal system with measuring line that screws into the tank
  • green fuels ready: suitable for use at tank facilities filed with the new paraffinic fuels HVO or GTL
  • quick-action shut-off valve with lever for remote closing in emergency situations
  • materials resistant to biofuel and biodiesel mixtures with max. 30 % FAME
  • PROOFED BARRIER if installed with vent hose
  • watertight up to 10 m water column - ideal for use in flood hazard areas

For withdrawal of fuel oil from underground and aboveground tanks in single-line or dual-line mode. Suitable for fuel oil EL (DIN 51603-1), diesel fuel (EN 590), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as well as biofuel and biodiesel with a maximum of 30 % FAME (EN 14214). Also suitable for use with the new paraffinic fuels HVO or GTL as an admixture or 100%. Suitable for use in flood hazard areas and flood risk areas.

Combination fitting made of brass as a withdrawal system with measuring line that screws into the tank. Threaded female connection for suction and return lines. Universal compression fittings for pipes with 8 and 10 mm outside diameters for the suction line are enclosed. Measuring line connection for hose or pipe with 6 mm outside diameter. Quick-action shut-off valve with lever for remote closing in emergency situations. Pressure- and vacuum-tight up to 1 bar.

Connection
Tank:
G1 male
suction line/return line:
G⅜ female
Measuring line:
6 mm
Length
Suction hose:
3.15 m
measuring hose
Miniflex 3 (3.15): 3.15 m
Test pressure
max. 6 bar
Flow rate
max. 150 l/h
Material
Screw fitting:
Messing
Suction hose:
NBR/PVC
Bottom part:
Zamak (ZnAl4Cu1)

900_000_0103.PDF

Tankentnahmeeinrichtung Euroflex, Miniflex

Manuals
PDF

Related products