En 
... MSA 10 DT 79541 Motorischer Stellantrieb MSA 10 DT AC/DC24V
PRO_TEC_VOR_STELLANTRIEB_MSA10_79540.TIF
PRO_TEC_VOR_STELLANTRIEB_MSA10_79540.TIF
Images 1
Back

MSA 10 DT | 79541

motorised actuator for hydraulic balancing

manufactured goods
Documents

  • First Open function
  • automatic thermal hydraulic balancing
  • high-precision valve control
  • ideal for new buildings and renovations
  • suitable for heating and cooling
  • probe position detected automatically, therefore impossible to confuse

Actuator for automatic hydraulic balancing and energy-saving operation of surface heating systems. Suitable for controlling the hot water valves in distribution manifolds such as heating/cooling circuit manifolds ProCalida® MC, EF, VA and IN. The actuators convert the electrical signal received from room or timer thermostats into a valve stroke to control the set temperature via the flow rate. The adaptive PID control algorithm of the continuous controller controls the flow rate based on the measure flow and return temperatures for hydraulic balancing.
The actuator is factory-opened (First Open function) so that the stroke valves at the heating circuit manifold remain open during initial commissioning. This facilitates mounting as well as filling and flushing of the system since, at this point in time, the control system is usually not yet operative. The First Open function (FO) is automatically disabled as soon as the actuator is electrically controlled. The FO function can be re-enabled via a reset.

Motorised, actuator with temperature-dependent control, with First Open and Re-Open function, LED indicator and two probe cables. Direct connection to the valve or upper part of the valve with union nut. Control via the supply voltage (230 V / 24 V) of the control terminal bar. MSA automatically detects which probe is used as the flow or return probe.

functions
first-open function (can be re-enabled),
Schließpunkterkennung durch Referenzfahrt bei Ansteuerung
Operating mode
closed when de-energised (NC)
Auslieferungszustand: Werkseitig geöffnet
control stroke
  4.5 mm
Closing dimension
  10.5 mm
Actuating force
  110 N
Connection
union nut M30 x 1.5 mm (Brass, nickel-plated)
Housing
Plastic PA 6, flame retardant
Degree of protection:
IP 54 (EN 60529)
cap:
white
cable
2 x 0.75 mm2, white
Length   0.9 m
Temperature probes
fastening by means of pipe clip, cannot be confused
Kabellänge 0,4 m
Operating temperature range
Operation:
max. 50 °C (at valve)
Ambient:
0/50 °C
Storage:
-25/+60 °C
ambient humidity:
< 85 % r.F., Non-condensing
Supply voltage
AC/DC 24 V
Control voltage
AC/DC 24 V
power input continuous operation
AC/DC 24 V: < 0.5 W
Switch on power
AC/DC 24 V:
  30 mA
Protection class
AC/DC 24 V: III (EN 60730-1)
Dimensions (H x W x D)
95.3 x 37.8 x 53.2 mm
Weight
  200 g

Related products