Skip to main content
Back

TSA 01 | 79062

thermostatic actuator

in-stock items

  • integrated stroke indicator
  • slim design (Ø 39 mm)
  • very low design for limited space conditions

For controlling the hot water valves in radiators or AFRISO distribution manifolds such as ProCalida® MC VA 1C. Actuators convert the electric signal they receive from room thermostats or thermostats with timers into a valve stroke to control the set temperature by means of the flow rate. The actuator is normally closed (NC) and thus immediately ready for automatic operation.

Electro-thermostatic actuator with integrated position indication in the cover window, connection cable and union nut for direct connection to the valve or upper part of the manifold. Closed when de-energised.

Operating mode
closed when de-energised (NC)
Stroke
> 3.2 mm
Integrated position indication inthe cover window
Opening time
5 − 6 min
Closing dimension
  10.8 mm
Actuating force
ca. 90 N
Connection
part no. 79062: Male thread M30 x 1.5 mm
Housing
Plastic
Degree of protection:
IP 54 (EN 60730-1)
cap:
transparent
Stroke indicator:
white
cable
2 x 0.75 mm2, grey, H05
Length   1 m
Operating temperature range
Operation:
max. 100 °C (at valve)
Ambient:
0/50 °C
Storage:
-25/+70 °C
ambient humidity:
< 85 % r.F., Non-condensing
Supply voltage
AC 230 V
Power input
ca. 2 W (Continuous operation)
Switch on power
  32.2 W
Inrush current
  140 mA
Protection class
II (EN 60730-1)
dimensions (H x ⌀)
part no. 79062: 62 x 40 mm
Weight
  109 g
Options
  • 24 V version