PRO_TEC_ANW_HT_FUELLSTAND_ANZEIGEGERAETE_DA10.TIF

Images 5

DA 10 / 12 / 14

digitales Anzeigegerät

Variants Documents

grey display with excellent readability
automatic off function for the backlight
text-based user interface
Bearing charts for cylindrical horizontal tanks and spherical tanks are pre-programmed
Linearisation for volume indication (24 points)
list of selectable units, custom display units can be defined
scalable units, displayed as bar chart
extended representation of limit values: window/trend functions
universal power supply unit
integrated supply voltage for transducer (e.g. DMU 08)

Universal application for electronic transducers for displaying measured values (DA 10), optionally with additional relay outputs (DA 12/14).

Digital display unit in plastic housing for control panel mounting. With grey display and automatic off function for the backlight. The universal measurement input can be configured as a current input or a voltage input. Standard bearing charts for cylindrical horizontal tanks and spherical tanks are pre-programmed, additional units can be selected or set up. The units are scalable and shown as bar charts. Limit values can be displayed via a window and a trend function (rising/falling). With display message (flashing error text) if values are exceeded, parameter backup for restoring previous configurations and potentiometer for test purposes.

		Part no.
display unit DA 10		31281
display and control unit DA 12		31282
display and control unit DA 14		31283

in-stock items
manufactured goods

Display: 5-digit graphical LC display,
weiße Hintergrundbeleuchtung,
text-based user interface,
Bedien- und Anzeigesprache Deutsch/Englisch/Französisch/Italienisch umschaltbar,
freely selectable units,
Einrichtung freier Anzeigeeinheiten

Measuring range

: ± 99999 Digits

: start and end values scalable as required

Linearity: ± 0.1 % v. Mw.

Resolution: Decimal point position can be set as required

Response time: < 0.2 s

Operating temperature range

Ambient:: 0/50 °C

Supply voltage

: AC 50 − 253 V, 4.4 VA

: DC 20 − 253 V, 2.5 W

Sensor supply: integrated, galvanically isolated supply voltage for transducer: ≥ DC 21 V at 20 mA

Sensor input

: all analogue standard signals, e.g. 4–20 mA, 0–20 mA, 0–1 V, 0–10 V as well as potentiometer

Analogue output: 0/4–20 mA, galvanically isolated

Analogue output 2

: DA 10:

relay contacts: DA 10:

Housing

: Standard rack mounting housing

W x H x D:: 96 x 48 x 135 mm

Panel cut out

W x H:: 92 x 45 mm

Degree of protection (front): IP 65 (EN 60529)

Electrical connection: Plug-in screw terminals (1.5 mm²)

Linearisation: customer-specific linearisation with a max. of 24 points for the indication of volume (e.g. litres) in non-linear tanks. Bearing charts for cylindrical horizontal tanks and spherical tanks are pre-programmed.