Skip to main content
Back

HydroFox® DMU 09 | 31576

Druckmessumformer Pegelsonde - Chemieausführung

manufactured goods

Measuring range0/600 mbar
Part no.31576

  • chemical-resistant plastic version
  • robust ceramic diaphragm without transmission liquid
  • highly resistant FEP cable
  • special calibration for all standard pressure units possible

For electronic, continuous level measurement in extremely corrosive liquids, e.g. chemicals or waste water from landfill sites.

Pressure transducers HydroFox® convert physical pressure into an electrical signal proportional to the pressure. HydroFox® DMU 09 uses a capacitance ceramic measuring cell.

Measuring accuracy
Deviation from the characteristic curve according to IEC 60770 – limit point calibration (non-linearity, hysteresis, repeatability)
< ± 0.35 % FSO
Measuring range
see ordering table
Overpressure safety
> 400 mbar: at least 3 x FS
Operating temperature range
Medium:
-25/+70 °C
Ambient:
-25/+70 °C
Storage:
-25/+70 °C
dynamic characteristics
Response time:
< 200 ms
Probe
L x ⌀:
126 x 45 mm
material
Housing:
PP
diaphragm:
ultra-pure ceramic (Al203 99.9 %)
seals:
FKM (Viton)
cable:
FEP
Supply voltage
DC 9 − 32 V
Output signal
4–20 mA, 2-wire
Load
Rmax = [(UB – UBmin)/0.02 A] Ω
Current input
< 21 mA
electrical protection
short circuit proof and protected against reverse polarity
Electrical connection
FEP cable with integrated breather tube for reference to the ambient atmospheric pressure
Cable length:
5 m
Degree of protection:
IP 68 (EN 60529)
CE conformity
EMC Directive 2014/30/EU
RoHS-Richtlinie 2011/65/EU
Pressure Equipment Directive 2014/68/EU

900_100_0832.PDF

Tauchsonde DMU 08, DMU 08 T, DMU 09

PDF
900_100_0821.PDF

Tauchsonde DMU 08…Ex, DMU 09…Ex

PDF