Flue gas analyser EUROLYZER^® S1 set Pro

AFRISO EUROLYZER S1 Pro Set CO/H2+, Feinzug, Druck S1 140 object_image_98595imagemain_en

Data sheet Flue gas analyser EUROLYZER^® S1 set Pro

Benefits

Large high-resolution display for optimum readability and and intuitive menu navigation, protected by scratch-resistant glass
Pioneering "dual-mode concept": Intuitive one-hand operation via scroll wheel or touch display – sensitive even with work gloves
Ready for all typical HVAC measuring tasks thanks to Bluetooth^® connection to more than 35 sensor modules and sets of the CAPBs^® system
TÜV-tested measurement as per 1st and 44th BlmSchV (German Federal Immission Act)
NO sensor can be retrofitted
H2-compensated robust CO sensor (measuring range up to 10,000 ppm)
Configurable macros for repetitive tasks
Multi-memory: Combine up to six different measurements into a single measurement report (for example, full load measurement/partial load measurement or flue gas measurement and flow pressure measurement)
Data transmission via Bluetooth^® or QR code to the AFRISO app EuroSoft^® connect for on-site documentation
5 years warranty on O₂ sensor
7 years full warranty in connection with a service contract

Application

Designed for flue gas measurements at oil, gas and pellets fired systems as well as for tightness tests at gas lines, for checking the connection pressure/flow pressure and the pressure loss. TÜV-tested measurements as per 1st and 44th BlmSchV (German Federal Immission Act) can be performed reliably and intuitively. Fast and easy Bluetooth^® connection to more than 35 sensor modules and sets of the AFRISO CAPBs^® make EUROLYZER^® S1 the central controller for all HVAC tasks.

Versions

	Part no.	Remember
Flue gas analyser EUROLYZER^® S1 set Pro O2, CO/H₂+, draft, pressure	P00141

Blue part no. = in-stock items

Downloads

	Description	Format	Language	Download / Link
Data sheet Flue gas analyser EUROLYZER^® S1 set Pro	Data sheet	PDF
Firmware update (CAPBs-enabled) EUROLYZER STx - V4 0070	Portable measuring instruments	ZIP

Technical data

Measuring ranges (measured values)

Flue gas temperature/differential temperature

0/1,150 °C

Air temperature/combustion air temperature

-20/+200 °C

Draft

-70/+70 hPa

Differential pressure

-150/+150 hPa

O2 measurement

0/21 Vol.-%

COH2 measurement

Nominal:

0/4,000 ppm

Maximum:

0/10,000 ppm

Additional technical specifications

Indication (calculated values)

CO2, COUndiluted (air-free), Lambda, Dew point, Eta efficiency, Flue gas losses qA, CO mg/m3 (natural gas), CO mg/kWh (fuel oil)

Operating temperature range

Ambient:

0/40 °C

Storage:

-20/+50 °C

Weight (measuring instrument)

500 g

Dimensions

W x H x D:

80 x 218 x 44 mm

Degree of protection

IP 42 (EN 60529)

Display

High-resolution display 4.3 "

Connections

Draft:

∅ 7 mm

Pressure:

∅ 8 mm

Gas:

∅ 8 mm

Temperature:

2 x socket type K

Supply voltage

Lithium-ion battery (3.6 V/5,000 mAh)
Power supply unit (USB-C)
Battery or mains

Hours of operation (eco mode)

12 Stunden

Data memory

Internal memory, 10,000 Messungen

Interfaces

Infrared,
Bluetooth®,
QR code generator,
USB-C

Approvals

TÜV-tested as per 1st and 44th BImSchV,
DIN EN 50379-1/2

Scope of delivery

With integrated magnet in housing
Calibration report
Quick charge power supply unit NTE 5 SF
Charging cable USB-A to USB-C (1 m)
5 x Infiltec fine filter
5 x Teflon membrane
Condensate filter cartridge KFP
Base handle AWS-B for interchangeable probes
Interchangeable probe AWS-S 180 mm
Ambient air probe TFB-UL 50-1
Hose for gas connection pressure
Hard top case Pro blue

Flue gas analyser EUROLYZER® S1 set Pro

Versions

Flue gas analyser EUROLYZER^® S1 set Pro