Skip to main content

EUROLYZER® S1 set Basic

Flue gas analyser

  • Configurable macros for practical multi-measurement of, for example, partial load, full load and annular gap
  • Compact flue gas probe AKS-K 170 mm with draft connection
  • large high-resolution display for optimum readability and and intuitive menu navigation, protected by scratch-resistant glass
  • Pioneering "dual-mode concept": Intuitive one-hand operation via scroll wheel or touch display – sensitive even with work gloves
  • Ready for all typical HVAC measuring tasks thanks to Bluetooth® connection to more than 35 sensor modules and sets of the CAPBs® system
  • TÜV-tested measurement as per 1st and 44th BlmSchV (German Federal Immission Act)
  • NO sensor can be retrofitted
  • H2-compensated robust CO sensor (measuring range up to 10,000 ppm)
  • Multi-memory: Combine up to six different measurements into a single measurement report (for example, full load measurement/partial load measurement or flue gas measurement and flow pressure measurement)
  • Data transmission via Bluetooth® or QR code to the AFRISO app EuroSoft® connect for on-site documentation
  • 5 years warranty on O2 sensor
  • 7 years full warranty in connection with a service contract

Designed for flue gas measurements at oil, gas and pellets fired systems as well as for tightness tests at gas lines, for checking the connection pressure/flow pressure and the pressure loss. TÜV-tested measurements as per 1st and 44th BlmSchV (German Federal Immission Act) can be performed reliably and intuitively. Fast and easy Bluetooth® connection to more than 35 sensor modules and sets of the AFRISO CAPBs® make EUROLYZER® S1 the central controller for all HVAC tasks.

Einsatzmedien
Produkteigenschaften
Schnittstellen
Zulassungen

Part no.
Flue gas analyser EUROLYZER® S1 set BasicO2, CO/H2+, draftP00140
  • in-stock items
  • manufactured goods

measuring ranges (measured values)
Flue gas temperature/differential temperature
0/1 150 °C
Air temperature/combustion air temperature
-20/+200 °C
Draft
-70/+70 hPa
O2 measurement
0/21 Vol.-%
COH2 measurement
nominal:
0/4 000 ppm
maximum:
0/10 000 ppm
additional technical specifications
Indication (calculated values)
CO2, COunverdünnt, Lambda, Taupunkt, Eta efficiency, Abgasverluste qA, CO mg/m(natural gas), CO mg/kWh (Heizöl)
Operating temperature range
Ambient:
0/40 °C
Storage:
-20/+50 °C
weight (measuring instrument)
  500 g
Dimensions
W x H x D:
80 x 218 x 44 mm
Degree of protection
IP 40 (EN 60529)
Display
high-resolution display 4.3 "
Connections
Draft:
∅ 7 mm
Gas:
∅ 8 mm
temperature:
2 x socket type K
Supply voltage
lithium-ion battery (3.6 V/5000 mAh)
Power supply unit (USB-C)
Battery or mains
Hours of operation (eco mode)
  12 Stunden
Data memory
internal memory,   10000 Messungen
Interfaces
Infrared,
Bluetooth®,
QR code generator,
USB-C
Approvals
TÜV-tested as per 1st and 44th BImSchV,
DIN EN 50379-1/2
Scope of delivery
  • Flue gas analyser EUROLYZER® S1 (O2, CO/H2+, draft)
  • mit integrierten Haftmagneten im Gehäuse
  • Calibration report
  • Netzteil NTE 5 USB-A
  • charging cable USB-A to USB-C (1 m)
  • 5 x Infiltec-Feinfilter
  • 5 x Teflon membrane
  • Kondensatfilterpatrone KFP
  • Flue gas combination probe, compact, AKS-K FZ 170 mm
  • Umgebungsluftfühler TFB-UL 50-1
  • system case L "Gas analysis"

KOMPLETTPAKETE_ABGASANALYSE_01-24.PDF

Komplettpakete für die Abgasanalyse - Aktion

PDF
Download
MIETVERTRAG_MESSGERAETE_01-23.PDF

Mietvertrag Handmessgeräte EUROLYZER, MULTILYZER, STM 225, DPK 60-7 sowie EUROprinter

PDF
Download
WARTUNGSVERTRAG_EUROLYZER_S1_01-23.PDF

Wartungsvertrag EUROLYZER S1

PDF
Download
900_000_1087-01.PDF

Abgasmessgerät EUROLYZER® S1

PDF
Download
UN38-3_525004.PDF

UN38-3_525004.PDF

PDF
Download
EuroSoft® connect für Windows

EuroSoft® connect für Windows

ZIP
Download

Modular probe system
Abb.
Bezeichnung
Base handle AWS-B Compensation line 5 m, with condensate filter cartridge KFP, with draft
Base handle AWS-B Compensation line 5 m, with condensate filter cartridge KFP, with draft | 510931
Interchangeable probe AWS-S 100 mm, ø 8 mm
Interchangeable probe AWS-S 100 mm, ø 8 mm | 523227
Interchangeable probe AWS-S 180 mm, ø 8 mm
Interchangeable probe AWS-S 180 mm, ø 8 mm | 523228
Interchangeable probe AWS-S 300 mm, ø 8 mm
Interchangeable probe AWS-S 300 mm, ø 8 mm | 523229
Interchangeable probe AWS-S 500 mm, ø 8 mm
Interchangeable probe AWS-S 500 mm, ø 8 mm | 523230
Interchangeable probe AWS-S 750 mm, ø 8 mm
Interchangeable probe AWS-S 750 mm, ø 8 mm | 523231
Interchangeable probe AWS-S 1000 mm, ø 8 mm
Interchangeable probe AWS-S 1000 mm, ø 8 mm | 523232
Interchangeable probe AWS-S 1500 mm, ø 8 mm
Interchangeable probe AWS-S 1500 mm, ø 8 mm | 523234
Multi-hole probe AWS-M length-adjustable 60–170 mm, ⌀ 8 mm
Multi-hole probe AWS-M length-adjustable 60–170 mm, ⌀ 8 mm | 523359
flexible probe AWS-F 400 mm, ø 9 mm
flexible probe AWS-F 400 mm, ø 9 mm | 523358
Annular gap probe AWS-R 300 mm, ø 9 mm
Annular gap probe AWS-R 300 mm, ø 9 mm | 523480
Protective cover AWS-SK
Protective cover AWS-SK | 524193
Flue gas probe plug-in units
Abb.
Bezeichnung
Annular gap probe RSO-UG 2 m hose length with connection piece
Annular gap probe RSO-UG 2 m hose length with connection piece | 500236
Annular gap probe RSO-UA universal, can be plugged onto all flue gas probes
Annular gap probe RSO-UA universal, can be plugged onto all flue gas probes | 570082
Multi-hole probe MSO-U 60–250 mm length-adjustable 60–250 mm, with connection fitting, without condensate filter cartridge
Multi-hole probe MSO-U 60–250 mm length-adjustable 60–250 mm, with connection fitting, without condensate filter cartridge | 569580A
Temperature probes
Abb.
Bezeichnung
Spike probe TFB-ES 600
Spike probe TFB-ES 600 | 523034
high-temperature sensor TFB-HT 1150-1 700 mm
high-temperature sensor TFB-HT 1150-1 700 mm | 569853
high-temperature sensor TFB-HT 1150-2 1000 mm
high-temperature sensor TFB-HT 1150-2 1000 mm | 569854
Air, gas, liquid probe TFB-LGF 900
Air, gas, liquid probe TFB-LGF 900 | 523035
Combustion air probe TFB-VL 100 M with magnetic holder
Combustion air probe TFB-VL 100 M with magnetic holder | 500141
Combustion air probe TFB-VL 100 MG with magnetic holder and rubber cone
Combustion air probe TFB-VL 100 MG with magnetic holder and rubber cone | 500141-1
Surface temperature probe TFB-OF 120
Surface temperature probe TFB-OF 120 | 522991
Combustion air probe TFB-VL 600-1 200 mm
Combustion air probe TFB-VL 600-1 200 mm | 500147
Combustion air probe TFB-VL 600-2 290 mm
Combustion air probe TFB-VL 600-2 290 mm | 500147-2
socket BMG yellow, 8 mm
socket BMG yellow, 8 mm | 522171
socket BFZ blue, 7 mm
socket BFZ blue, 7 mm | 522172
Transport systems/cases
Abb.
Bezeichnung
hard top case ProTect blue/black, with edge protection, for BLUELYZER, EUROLYZER and MULTILYZER
hard top case ProTect blue/black, with edge protection, for BLUELYZER, EUROLYZER and MULTILYZER | 523503
hard top case Pro Blue, for BLUELYZER, EUROLYZER and MULTILYZER
hard top case Pro Blue, for BLUELYZER, EUROLYZER and MULTILYZER | 523995
Modular high-temperature probe system
Abb.
Bezeichnung
Base handle AWS-BHT compensation line 2.4 m, with condensate filter cartridge KFP, with draft
Base handle AWS-BHT compensation line 2.4 m, with condensate filter cartridge KFP, with draft | 510821
Base handle AWS-BHT Compensation line 5 m, with condensate filter cartridge KFP, with draft
Base handle AWS-BHT Compensation line 5 m, with condensate filter cartridge KFP, with draft | 510831
Interchangeable probe AWS-SHT 300 mm, ø 8 mm
Interchangeable probe AWS-SHT 300 mm, ø 8 mm | 511232
Interchangeable probe AWS-SHT 500 mm, ø 8 mm
Interchangeable probe AWS-SHT 500 mm, ø 8 mm | 511233
Interchangeable probe AWS-SHT 750 mm, ø 8 mm
Interchangeable probe AWS-SHT 750 mm, ø 8 mm | 511235
Interchangeable probe AWS-SHT 1000 mm, ø 8 mm
Interchangeable probe AWS-SHT 1000 mm, ø 8 mm | 511236
Interchangeable probe AWS-SHT 1500 mm, ø 8 mm
Interchangeable probe AWS-SHT 1500 mm, ø 8 mm | 511238
Interchangeable probe AWS-SHT 2000 mm, ø 8 mm
Interchangeable probe AWS-SHT 2000 mm, ø 8 mm | 511240
Interchangeable ceramics probe AWS-SK 1000 mm, ø 10 mm
Interchangeable ceramics probe AWS-SK 1000 mm, ø 10 mm | 524954

Portable measuring instruments for service and maintenance
Abb.
Bezeichnung
Flue gas analyser EUROLYZER® S1 set Pro O<sub>2</sub>, CO/H<sub>2</sub>+, draft, pressure
Flue gas analyser EUROLYZER® S1 set Pro O2, CO/H2+, draft, pressure | P00141

Modular probe system
Abb.
Bezeichnung
Base handle AWS-B compensation line 2.4 m, with condensate filter cartridge KFP, with draft
Base handle AWS-B compensation line 2.4 m, with condensate filter cartridge KFP, with draft | 510921
Interchangeable probe AWS-S 180 mm, ø 8 mm
Interchangeable probe AWS-S 180 mm, ø 8 mm | 523228
Temperature probes
Abb.
Bezeichnung
Ambient air probe TFB-UL 50-1
Ambient air probe TFB-UL 50-1 | 521844
Condensate filter cartridges KFP
Abb.
Bezeichnung
condensate filter cartridge KFP 2P
condensate filter cartridge KFP 2P | 500192
spare parts package gas treatment system KFP 2P 5 x particle filter, 5 x Teflon membrane
spare parts package gas treatment system KFP 2P 5 x particle filter, 5 x Teflon membrane | 500214