En 
Domestic technology Level indicators and level controllers 52151 Füllstandmessgerät TankControl 10
PRO_TEC_SAL_TANKCONTROL_10_SONDE_52151.TIF
PRO_TEC_VOR_SONDEN_FUER_TANKCONTROL10.TIF
PRO_TEC_SAL_TANKCONTROL10_52151.TIF
PRO_TEC_ANW_HT_FUELLSTAND_HEIZOELTANK_TANKCONTROL.TIF
PRO_TEC_SAL_TANKCONTROL_10_SONDE_52151.TIF
PRO_TEC_VOR_SONDEN_FUER_TANKCONTROL10.TIF
PRO_TEC_SAL_TANKCONTROL10_52151.TIF
PRO_TEC_ANW_HT_FUELLSTAND_HEIZOELTANK_TANKCONTROL.TIF
Images 4
Back

TankControl 10 | 52151

hydrostatic level indicator

in-stock items
Documents

  • for fuel oil EL, L, diesel fuel, biodiesel and water
  • universal application in tanks of up to a height of 3 m
  • graphical indication of consumption and remaining range
  • with visual/audible alarms, Acknowledge button and 2 relays
  • no bearing charts required since all standard tank shapes are stored
  • easy operation due to device setup via menus
  • high measuring accuracy due to electronic sensor (pressure measuring cell)
  • Remote measurements up to 15 m
  • materials resistant to biofuel and biodiesel with max. 100 % FAME
  • green fuels ready: suitable for use at tank facilities filed with the new paraffinic fuels HVO or GTL
  • watertight up to 10 m water column - ideal for use in flood hazard areas

Continuous level measurement with graphical display for indication of consumption (history), calculation of remaining range (forecast) and signalling of minimum or maximum levels as well as for level control. Suitable for fuel oil EL, L (DIN 51603-1), diesel fuel (EN 590), water (no drinking water!), liquid fuels as per DIN SPEC 51603-6 and DIN/TS 51603-8 as wells as biofuel and biodiesel with up to 100 % FAME (EN 14214). This product is therefore ideal for all ecologically upgraded fuel oil consuming systems that use the new paraffinic fuels HVO or GTL as an admixture or 100 %.
For tanks from 1,000 to 4,000 mm liquid level.
In conjunction with an additional submersible probe for differential alarm also suitable for detecting level differences in communicating tanks (e.g. battery tanks) which may cause overfilling. It is also possible to connect a floating probe for backflow alarms (drain system, e.g. for rain water harvesting systems) or for additional minimum or maximum alarms. Suitable for use in flood hazard areas and flood risk areas.

The hydrostatic level indicator consists of a control unit with numerical and graphical display and a submersible probe with integrated pressure measuring cell. Optionally with additional submersible probe for differential alarm or with floating probe. The system displays either litres, m3, % or liquid level (mm). When the level falls below or exceeds an adjustable minimum or maximum value, the control unit triggers visual and audible (can be acknowledged) alarms. The value for submersible probe 2 is displayed in mm. If an adjustable level difference between submersible probe 1 and submersible probe 2 is exceeded, an alarm is triggered. Two additional relay contacts with selectable switching points are available for external alarm devices, for level control or for connection to telecommunication or building control systems. Easy operation due to device setup via menus. High measuring accuracy due to electronic sensing. Standard tank shapes are stored. Watertight up to 10 m water column.

functions
units switching,
tägliche Speicherung von Füllstanddaten,
consumption monitoring,
grafische Auswertedarstellung für Verbrauchswerte (bis 5 Jahre),
calculation of remaining range,
Alarmfunktionen (Min./Max.),
sensor error and short circuit alarm
Measuring range
0/400 mbar
Measuring accuracy
± 1.5 % FSO ±
Operating temperature range
Medium:
-5/+70 °C
Ambient:
0/45 °C
Storage:
-5/+70 °C
Display
High-resolution, backlit graphical display (30 x 50 mm). indication of either litres (6 digits), m3, % or liquid level in mm. Symbols for alarm functions.
Submersible probe
L x ⌀:
53 x 24 mm
Housing:
Stainless steel 304
cable:
PVC, 6 m with atmospheric reference hose
diaphragm:
Stainless steel 316 L
seals:
FKM (Viton)
Spacer:
POM, PE
Degree of protection:
IP 68 (EN 60529)
Supply voltage
AC 230 V
Lithium battery for data backup (calendar function)
Switching output
Relay contact:
2 voltage-free changeover contacts
Contact rating:
max. AC 250 V, 2 A
visual indication
LED red:
Alarm
audible alarm
integrated piezo-buzzer, can be acknowledged
min. 70 dB(A)
Housing
Wall mounting housing made of impact-resistant plastic (PC/ABS)
W x H x D:
100 x 188 x 65 mm
Degree of protection:
IP 54 (EN 60529)
Scope of delivery
  • Control unit with graphical display and 15 m connection cable to the probe (cannot be extended)
  • Tauchsonde mit 6 m Tauchkabel
  • Moisture-proof junction box (IP 54)
  • Verschraubungsset G1 x G1½ x G2
  • mounting kit for withdrawal flange at plastic battery tanks
Option
  • Submersible probe for differential alarm
  • Schwimmersonde (Ersatzsonde Minimelder)

Accessories and spare parts for level indicators and level controllers
Abb.
Bezeichnung
Sonde für Minimelder
Sonde für Minimelder | 16703
Sonde für DIT/TankControl
Sonde für DIT/TankControl | 52152
Mounting accessories
Abb.
Bezeichnung
Dichtungsrahmen IP 54
Dichtungsrahmen IP 54 | 43416
mounting frame
mounting frame | 43521
Montageset WATCHDOG Warngeräte
Montageset WATCHDOG Warngeräte | 43100

Accessories and spare parts for level indicators and level controllers
Abb.
Bezeichnung
Sonde für DIT/TankControl
Sonde für DIT/TankControl | 52153

Related products