En 
... MULTILYZER STx - Set P04741217 MULTI STe Set5 O2, CO/H2, CO4%, FZ-Diff, BLE,STM
PRO_TEC_VOR_MULTILYZER_STX_M04748210.TIF
PRO_TEC_DRA_MULTILYZER_STX_XXXXX_1.TIF
PRO_TEC_DRU_MULTILYZER_STX_XXXXX_1.TIF
PRO_TEC_ANW_TM_ABGASANALYSE_MULTILYZER_STX_ANSCHLUESSE10.TIF
PRO_TEC_VOR_MULTILYZER_STX_M04748210.TIF
PRO_TEC_DRA_MULTILYZER_STX_XXXXX_1.TIF
PRO_TEC_DRU_MULTILYZER_STX_XXXXX_1.TIF
PRO_TEC_ANW_TM_ABGASANALYSE_MULTILYZER_STX_ANSCHLUESSE10.TIF
Images 4
Back

Flue gas analyser MULTILYZER STx Set 5 O2, COH2, CO40,000, (differential) temperature, draft, differential pressure, module particulate matter measurement | P04741217

Flue gas analyser MULTILYZER STx

in-stock items
Documents

  • All-in-one: Flue gas analysis, (differential) pressure measurement, (differential) temperature measurement, dust measurement, Pitot measurement (in conjunction with STM 225)
  • ECO sensor: Lead-free O2 sensor with long service life and optimised calibration phase, short response time, resistant to biogenous fuels
  • Can be equipped with a combination of up to six sensors: O2, CO/H2, NO, SO2, NO2 und COhigh
  • CO room air monitoring
  • qA mean value measurement as per 1st German Federal Immission Act BlmSchV
  • Quick-access function keys for direct data access
  • Measurement logs as QR code, database memory, customer data management
  • 5 years warranty on O2, CO/H2 sensors
  • 7 years full warranty in connection with a service contract
  • CAPBs®-enabled

Flue gas analyser for measuring small and medium-sized oil, gas and pellets fired heating systems according to the German Federal Immission Act and for CO concentration safety checks at gas fired systems. Ideal for servicing solid fuel systems (for example, coal or wood fired systems with temporary CO peaks) or bivalent, modulating combined heating and power plants. If used within the framework of dust measurements, MULTILYZER STx determines the flue gas value and serves as the central controller for the dust measuring instrument STM 225.

Einsatzmedien
Schnittstellen
Zulassungen

measuring ranges (measured values)
Flue gas temperature/differential temperature
0/1 150 °C
Air temperature/combustion air temperature
-20/+200 °C
Draft
-70/+70 hPa
Differential pressure
-150/+150 hPa
barometric pressure
500/1 150 hPa
Pitot
0.5/70 m/s
O2 measurement
0/21 Vol.-%
COH2 measurement
maximum:
0/10 000 ppm
CO measurement
0/40 000 ppm
additional technical specifications
Indication (calculated values)
CO2, COunverdünnt, Lambda, Eta-Wirkungsgrad, Flue gas losses qA, Taupunkt, temperature difference, CO mg/m3 (Erdgas), CO mg/kWh (fuel oil)
Operating temperature range
Ambient:
5/40 °C
Storage:
-20/+50 °C
weight (measuring instrument)
  638 g (depends on equipment with sensors)
Dimensions
W x H x D:
90 x 220 x 53 mm
Degree of protection
IP 42 (EN 60529)
Display
TFT colour display 3.5 "
W x H:
53 x 71 mm
240 x 320 pixels
Connections
Draft/pressure:
∅ 7 mm
Gas:
∅ 8 mm
temperature:
socket type K
Supply voltage
lithium-ion battery (3.6 V/2900 mAh)
power supply unit (mini USB)
Battery or mains
Hours of operation
max. 12 Stunden
Data memory
microSD card, max. 32 GB
Data logger
1-999 seconds, interval freely selectable
Interfaces
Infrared,
Bluetooth®,
QR code generator,
MicroSD-Kartenslot
Approvals
1. BImSchV,
KÜO (TÜV ByRgG 301),
EN 50379-2
Scope of delivery
  • Measuring instrument
  • Kalibrierprotokoll
  • protective sleeve for device with magnets
  • Netzteil NTE 5 USB-A
  • Charging cable USB-A - mini USB
  • MicroSD-Karte inkl. USB 2.0 SD-Card-Reader
  • Base handle AWS-B for interchangeable probes 2.4 m condensate filter cartridge/draft
  • Wechselsonde AWS-S 300 mm
  • Condensate filter cartridge KFP
  • Infiltec-Feinfilter (5 Stück)
  • Teflon membrane (5 pieces)
  • Umgebungsluftfühler TFB-UL 50-1
  • connection kit ASS-DP
  • Gerätekoffer

Transport systems / cases / protective sleeve
Abb.
Bezeichnung
system case L „Gasanalyse“ for BLUELYZER ST, EUROLYZER STx, MULTILYZER STe/STx and accessories
system case L „Gasanalyse“ for BLUELYZER ST, EUROLYZER STx, MULTILYZER STe/STx and accessories | 500900

Modular probe system
Abb.
Bezeichnung
Base handle AWS-B compensation line 2.4 m, with condensate filter cartridge KFP, with draft
Base handle AWS-B compensation line 2.4 m, with condensate filter cartridge KFP, with draft | 510921
Interchangeable probe AWS-S 300 mm, ø 8 mm
Interchangeable probe AWS-S 300 mm, ø 8 mm | 523229
Annular gap probe AWS-R 300 mm, ø 9 mm
Annular gap probe AWS-R 300 mm, ø 9 mm | 523480
Flue gas probe plug-in units
Abb.
Bezeichnung
Annular gap probe RSO-UG 2 m hose length with connection piece
Annular gap probe RSO-UG 2 m hose length with connection piece | 500236
Annular gap probe RSO-UA universal, can be plugged onto all flue gas probes
Annular gap probe RSO-UA universal, can be plugged onto all flue gas probes | 570082
Thermal printer EUROprinter
Abb.
Bezeichnung
thermal printer paper EUROprinter 5 rolls
thermal printer paper EUROprinter 5 rolls | 523374
thermal printer paper EUROprinter For official documentation, self-adhesive, 1 roll
thermal printer paper EUROprinter For official documentation, self-adhesive, 1 roll | 522666
Thermal printer EUROprinter II
Thermal printer EUROprinter II | 524340
Thermal printer EUROprinter II IR-BLE
Thermal printer EUROprinter II IR-BLE | 524346
Soot pumps RSP
Abb.
Bezeichnung
Soot pump RSP-L
Soot pump RSP-L | 569581
Interfaces
Abb.
Bezeichnung
Module USB-A for PC Bluetooth® Smart dongle for PC application EuroSoft mobile/connect
Module USB-A for PC Bluetooth® Smart dongle for PC application EuroSoft mobile/connect | 500856
Temperature probes
Abb.
Bezeichnung
Combustion air probe TFB-VL 100 M with magnetic holder
Combustion air probe TFB-VL 100 M with magnetic holder | 500141
Combustion air probe TFB-VL 100 MG with magnetic holder and rubber cone
Combustion air probe TFB-VL 100 MG with magnetic holder and rubber cone | 500141-1
Ambient air probe TFB-UL 50-1
Ambient air probe TFB-UL 50-1 | 521844
Combustion air probe TFB-VL 600-1 200 mm
Combustion air probe TFB-VL 600-1 200 mm | 500147
Combustion air probe TFB-VL 600-2 290 mm
Combustion air probe TFB-VL 600-2 290 mm | 500147-2
Options for portable measuring instruments for service and maintenance
Abb.
Bezeichnung
Retrofitting for NO measurement MULTILYZER STx | 511041
Power supply units and charging cables
Abb.
Bezeichnung
power supply unit NTE 5 USB-A
power supply unit NTE 5 USB-A | 523493
Charging cable USB-A / mini USB
Charging cable USB-A / mini USB | 523506
Memory
Abb.
Bezeichnung
microSDHC card with USB 2.0 card reader
microSDHC card with USB 2.0 card reader | 511035
Database memory Extension of memory function, customer database, customer information | 511030
Condensate filter cartridges KFP
Abb.
Bezeichnung
condensate filter cartridge KFP
condensate filter cartridge KFP | 500190
Assortment of O rings KFP sorted
Assortment of O rings KFP sorted | 511002
Infiltec fine filter 5 pieces
Infiltec fine filter 5 pieces | 511003
spare parts package gas treatment system KFP 5 x Infiltec fine filter, 5 x Teflon membrane
spare parts package gas treatment system KFP 5 x Infiltec fine filter, 5 x Teflon membrane | 500208
Filters
Abb.
Bezeichnung
Teflon membrane 10 pieces
Teflon membrane 10 pieces | 511004
Hoses
Abb.
Bezeichnung
Connection kit ASS-DP For differential pressure measurement
Connection kit ASS-DP For differential pressure measurement | 500237
Pitot tubes
Abb.
Bezeichnung
Pitot tube PTR-360 Probe insertion depth 360 mm
Pitot tube PTR-360 Probe insertion depth 360 mm | 500238
Pitot tube PTR-460 Probe insertion depth 460 mm
Pitot tube PTR-460 Probe insertion depth 460 mm | 500238-1
ISO calibration
Abb.
Bezeichnung
ISO calibration pressure, temperature and 2 gas sensors Flue gas analysers
ISO calibration pressure, temperature and 2 gas sensors Flue gas analysers | 524210-06
ISO calibration pressure, temperature and 3 gas sensors Flue gas analysers
ISO calibration pressure, temperature and 3 gas sensors Flue gas analysers | 524210-07

Related products