PRO_TEC_VOR_MULTILYZER_STX_M04748210.TIF

PRO_TEC_ANW_TM_ABGASANALYSE_MULTILYZER_STX_ANSCHLUESSE10.TIF

Images 4

Back

MULTILYZER STx - Set | P04729210

Flue gas analyser

in-stock items

Documents

All-in-one: Flue gas analysis, (differential) pressure measurement, (differential) temperature measurement, dust measurement, Pitot measurement (in conjunction with STM 225)
ECO sensor: Lead-free O₂ sensor with long service life and optimised calibration phase, short response time, resistant to biogenous fuels
Can be equipped with a combination of up to six sensors: O2, CO/H2, NO, SO2, NO2 und COhigh
CO room air monitoring
qA mean value measurement as per 1st German Federal Immission Act BlmSchV
Quick-access function keys for direct data access
Measurement logs as QR code, database memory, customer data management
5 years warranty on O2, CO/H2 sensors
7 years full warranty in connection with a service contract
CAPBs®-enabled

Flue gas analyser for measuring small and medium-sized oil, gas and pellets fired heating systems according to the German Federal Immission Act and for CO concentration safety checks at gas fired systems. Ideal for servicing solid fuel systems (for example, coal or wood fired systems with temporary CO peaks) or bivalent, modulating combined heating and power plants. If used within the framework of dust measurements, MULTILYZER STx determines the flue gas value and serves as the central controller for the dust measuring instrument STM 225.

Einsatzmedien

Schnittstellen

Zulassungen

measuring ranges (measured values)

Flue gas temperature/differential temperature: 0/1 150 °C

Air temperature/combustion air temperature: -20/+200 °C

Draft: -70/+70 hPa

Differential pressure: -150/+150 hPa

barometric pressure: 500/1 150 hPa

Pitot: 0.5/70 m/s

O2 measurement: 0/21 Vol.-%

COH2 measurement

maximum:: 0/10 000 ppm

additional technical specifications

Indication (calculated values): CO₂, CO_unverdünnt, Lambda, Eta-Wirkungsgrad, Flue gas losses qA, Taupunkt, temperature difference, CO mg/m³ (Erdgas), CO mg/kWh (fuel oil)

Operating temperature range

Ambient:: 5/40 °C

Storage:: -20/+50 °C

weight (measuring instrument): 631 g (depends on equipment with sensors)

Dimensions

W x H x D:: 90 x 220 x 53 mm

Degree of protection: IP 42 (EN 60529)

Display

: TFT colour display 3.5 "

W x H:: 53 x 71 mm

: 240 x 320 pixels

Connections

Draft/pressure:: ∅ 7 mm

Gas:: ∅ 8 mm

temperature:: socket type K

Supply voltage

: lithium-ion battery (3.6 V/2900 mAh)

: power supply unit (mini USB)

: Battery or mains

Hours of operation: max. 12 Stunden

Data memory: microSD card, max. 32 GB

Data logger: 1-999 seconds, interval freely selectable

Interfaces: Infrared,
Bluetooth®,
QR code generator,
MicroSD-Kartenslot

Approvals: 1. BImSchV,
KÜO (TÜV ByRgG 301),
EN 50379-2

Scope of delivery

Measuring instrument
Kalibrierprotokoll
protective sleeve for device with magnets
Netzteil NTE 5 USB-A
Charging cable USB-A - mini USB
MicroSD-Karte inkl. USB 2.0 SD-Card-Reader
Base handle AWS-B for interchangeable probes 2.4 m condensate filter cartridge/draft
Wechselsonde AWS-S 300 mm
Condensate filter cartridge KFP
Infiltec-Feinfilter (5 Stück)
Teflon membrane (5 pieces)
Umgebungsluftfühler TFB-UL 50-1
connection kit ASS-DP
Gerätekoffer