En 
Domestic technology Portable measuring instruments for service and maintenance 69483 Messgasaufbereitung TMA 65
PRO_TEC_VOR_TMA65_69483_OFFEN.TIF
PRO_TEC_VOR_TMA65_69483_GESCHLOSSEN.TIF
PRO_TEC_SAL_TMA65_69483.TIF
PRO_TEC_SAR_TMA65_69483.TIF
PRO_TEC_ANW_TMA65_69483_GASLAUFPLAN.TIF
PRO_TEC_VOR_TMA65_69483_OFFEN.TIF
PRO_TEC_VOR_TMA65_69483_GESCHLOSSEN.TIF
PRO_TEC_SAL_TMA65_69483.TIF
PRO_TEC_SAR_TMA65_69483.TIF
PRO_TEC_ANW_TMA65_69483_GASLAUFPLAN.TIF
Images 5
Back

TMA 65 | 69483

Gas treatment

manufactured goods

  • compact version of a fully-featured gas treatment system in a robust case
  • can be used as a portable or stationary gas treatment system
  • adjustable output dew point and alarm thresholds
  • gas cooler with 80 kJ/h nominal capacity
  • optional: humidity probe with bypass valve, rotameter
  • with connection for 1 heated line (no control or controlled)
  • ready to operate after approx. 10 minutes

Portable gas treatment system for performing accurate gas analyses at changing sites with different analysis devices. Especially for long-term or continuous measurements and measurements involving pollution and/or condensate. Decisive for precise and reproducible measurement results.

The base version of TMA 65 consists of a gas cooler with condensate pump and filter. Irrespective of the ambient temperature, the gas cooler cools the gas down to the adjusted dew point. A safety circuit only releases the gas pump when the cooler has reached its point of operation. The gas cooler and the filter element are adapted to condition corrosive gases. With the optional gas pump with bypass valve and the flow meters, it is possible to supply up to two gas outlets individually. The function "cold start" enables fast use even at a storage temperature of less than 5 °C.

Operating temperature range
Ambient:
5/50 °C
Gas outlet dew point:
adjustable:
2/20 °C
Factory setting:
5 °C
alarm thresholds
adjustable, –3/–1 K and 1/7 K (around dew point)
Gas flow
50/280 l/h
Operating pressure
0.2/2 bar absolut
static dew point
± 0.1 K
in entire range:
± 1.5 K
Input dew point
max. 70 °C
Gas inlet temperature
max. 140 °C
nominal cooling capacity
  80 kJ/h   at 25 °C
Supply voltage
AC 230 V, 50/60 Hz
Current input
max. 250 VA (max. without heated gas line)
wetted parts
PVDF, Glas, Stainless steel, PTFE, sintered PTFE, Norprene, Viton®, Epoxidharz
Housing
W x H x D:
360 x 460 x 260 mm
connection length low temperature connector: 2.5 m
Weight:
ca. 13.5 kg (ca. base device)
Degree of protection:
IP 20 (EN 60529)
Options
  • other connections for gas inlet/gas outlet
  • Versorgungsspannung AC 115 V, 50/60 Hz
  • Gas pump MGP 65 BV with bypass valve
  • Feuchtefühler KFF 65
  • flow meters DFM 65 SK

Related products