Liquid detector AFA 11 with burner connection kit

AFRISO EnOcean-Funkmodul TCM 320 für WATCHDOG-LINE Geräteplatinen VOR 710 330 AFRISO EnOcean-Funkmodul TCM 320 für WATCHDOG-LINE Geräteplatinen VOR 710 330
EnOcean-Funkmodul TCM 320 für WATCHDOG-LINE Geräteplatinen
AFRISO EnOcean-Funkmodul TCM 320 für WATCHDOG-LINE Geräteplatinen VOR 710 330
 VOR 75360 object_image_95109imagemain_en
AFRISO EnOcean-Funkmodul TCM 320 für WATCHDOG-LINE Geräteplatinen VOR 710 330
 ANW 75360
Data sheet liquid detector AFA 11 with burner connection kit
AFRISO Data sheet liquid detector AFA 11 with burner connection kit

Versions

Part no. Remember
Liquid detector AFA 11 BAS AC 230 V 40891
EnOcean® wireless module TCM 320 78082

Blue part no. = in-stock items

Description Format Language Download / Link
Data sheet liquid detector AFA 11 with burner connection kit Data sheet PDF
AFRISO Data sheet liquid detector AFA 11 with burner connection kit
WATCHDOG-LINE alarm units Brochures PDF
AFRISO WATCHDOG-LINE alarm units
Liquid detector AFA 11, burner connection kit, BAS Mounting instructions PDF
AFRISO Liquid detector AFA 11, burner connection kit, BAS

The liquid detector AFA 11 BAS is the successor product of the oil/water alarm unit 3 with burner connection kit.

The liquid detector AFA 11 with burner connection kit consists of a control unit with visual/audible alarm, Test and Acknowledge keys, a relay output and a photoelectric probe with 10 m connection cable. Cable and connector for connection of burner and boiler are fully wired and ready to be connected. In the event of an alarm, the unit triggers visual and audible alarms and switches off the burner. The audible alarm can be muted with the Acknowledge key. The visual alarm remains active until the leak has been removed. The burner then resumes operation. The Test key allows you to simulate an alarm condition in order to perform a function test. Alarm units with the EnOcean-ready label can be integrated into your existing building automation systems, for example, AFRISO smart home, at a later point in time. To do so, plug the EnOcean® wireless module into the EnOcean® interface (PCB of the device). The AFRISOhome gateway in conjunction with additional AFRISO smart home products with EnOcean® wireless technology allow you to configure a whole range of fully customisable, extensible features for the protection of plants and buildings. Power outage alarm: An optional 9 V battery can be connected so that an audible signal is triggered in the case of power outage. The audible signal cannot be acknowledged and is disabled once power is available again.

Operating temperature range (ambient)
Control unit:
-10/+60 °C
Probe:
-10/+60 °C
Probe
L x ⌀:
33 x 10 mm
Cable length:
10 m
Response level (EN 13160-4):
≥ 4 mm
Connector
Burner:
7-pin, female with 3 m cable
Boiler:
7-pin, male, with 3 m cable
Supply voltage
AC 230 V
Nominal power
2.5 VA
Alarm sound
Min. 70 dB(A)
Housing
Wall mounting housing made of impact-resistant plastic (ABS)
W x H x D:
100 x 188 x 65 mm
Degree of protection:
IP 30 (EN 60529)
Approval
DIBt: Z-65.40-214
Scope of delivery
  • Control unit
  • 1 connected photoelectric probe
  • One connected plug each for burner and boiler connection
Option
  • EnOcean<sup>®</sup> wireless module (can be retrofitted)